background image

2

-EN

Safety Information

FCC INFORMATION

This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,

including interference that may cause undesired operation.

Note:

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, it may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment dose cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

CAUTION

 

—Changes or modifications not approved by JVC

could void user’s authority to operate the
equipment.

Contact

Address:

JVC AMERICAS CORP.,
1700 VALLEY ROAD, WAYNE, N.J. 07470

Telephone: (973) 315-5000

INFORMATION (for CANADA)

This Class B digital apparatus meets all requirements of
the Canadian Interference-causing Equipment Regulations.

RENSEIGNEMENT (Pour CANADA)

Cet appareil numérique de la classe B respecte toutes les
exigences du Réglement sur le matérier brouilleur du
Canada.

WARNING: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION :

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of impor tant operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

Thank you for purchasing this JVC product. Before you begin
operating this unit, please read the instructions carefully to be
sure you get the best possible performance. If you have any
questions, consult your JVC dealer.

IMPORTANT

1. Installation

Select a place which is level, dry and neither too hot nor
too cold (between -5° C and 40° C/23° F and 104° F).

Keep away from direct sunlight.

Do not put it too close to a heater.

2. Power cord

Do not handle the power cord with wet hands!

Do not bend the power cord sharply.

When unplugging the power cord, do not pull on the cord,
Hold the plug itself and remove it from the AC outlet.

3. Malfunctions, etc.

There are no user serviceable parts inside. If anything
goes wrong, unplug the power cord and consult your
dealer.

Do not insert any metallic object.

Do not allow water to get inside.

CAUTION

To reduce the risk of electrical shocks , fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.

* It may be unlawful to record or play back copyrighted material

without the consent of the copyright owner.

JX-S333e.p65

05.2.8, 2:50 PM

2

Summary of Contents for JX-S333



























Reviews: