background image

E-2

Thank you for purchasing this product.
(These instrustions are for KA-DV300U)
Before beginning to operate this unit, please read the instruction manual carefully in order
to make sure that the best possible performance is obtained.

WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.

AVERTISSEMENT:
POUR EVITER LES RISQUES
D’INCENDIE OU D’ELECTRO-CUTION,
NE PAS EXPOSER L’APPAREIL A
L’HUMIDITE OU A LA PLUIE.

Due to design modifications, data given in this
instruction book are subject to possible change
without prior notice.

Safety Precautions

POWER SYSTEM

Connection of POWER supply

The power for the network pack is supplied through
the camera that is connected to the network pack.

This equipment is in conformity with the provisions and protection requirements of the correspond-
ing European Directives. This equipment is designed for professional video appliances and can be
used in the following environments:

• residential area (in houses) or rural area
• commercial and light industry; e.g. offices or theatres
• urban outdoors

In order to keep the best performance and furthermore for electromagnetic compatibility. Use the
PC Card which acquired a CE mark.

Caution

Where there are strong electromagnetic waves or magnetism, for example near a radio or TV
transmitter, transformer, motor, etc., the picture may be disturbed. In such case, please keep the
apparatus away from the sources of the disturbance.

English

Deutsch

Fran

ç

ais

KA-DV300

INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

NETWORK PACK STARTUP GUIDE

NETZWERKPACK BEDIENUNGSLEITFADEN

BACK DE RESEAU GUIDE DE DEMARRAGE

LWT0026

For Customer Use:

Enter below the Serial No. which is
located on the body. Retain this
information for future reference.

Model No.

KA-DV300

Serial No.

This instruction book is made from
100% recycled paper.

Summary of Contents for KA-DV300














































Reviews: