38
Others
Troubleshooting
Screen display
<Operation related>
NO CF CARD!
(Flashing for 3 sec.)
PROTECT!
(Flashing for 3 sec.)
NO CLIP!
(Flashing for 3 sec.)
SET WLAN AD HOC MODE
OFF!
(Flashing for 3 sec.)
SET DHCP OFF!
(Flashing for 3 sec.)
SET VIDEO RATE 64K – 384K!
(Flashing for 3 sec.)
SET MAX FRAME RATE
7F OR 4F!
(Flashing for 3 sec.)
SET MAX FRAME RATE
15F – 4F!
(Flashing for 3 sec.)
SET PIX SIZE 176
×
144!
(Flashing for 3 sec.)
Cause
There is no CF memory card inserted.
Deletion of a protected clip file was
attempted.
There is no CF memory card inserted, of
there is no clip file available.
Use of DHCP server was attempted
while in the AD HOC mode.
Selection of AD HOC mode was at-
tempted while using DHCP server.
Attempted to set MAX FRAM RATE to
15F when VIDEO RATE is set to 32K in
the ENCODE SET menu.
Attempted to set VIDEO RATE to 32K
when MAX FRAME RATE is set to 15F in
the ENCODE SET menu.
Attempted to set PIX SIZE to 352
×
288
with MAX FRAME RATE set to 30F.
Attempted to set MAX FRAME RATE to
30F with PIX SIZE set to 352
×
288.
Remedy
Insert a CF memory card.
To delete the clip file, remove the
protection.
Check the CF memory card.
Set DHCP in the NETWORK SET menu
screen to OFF when using the AD HOC
mode.
Set WLAN AD MOC MODE in the
NETWORK SET menu screen to OFF
when using DHCP server.
Use VIDEO RATE between 64K ~ 384K.
Use MAX FRAME RATE 7F or 4F.
Use MAX FRAME RATE 15F ~ 4F.
Use PIX SIZE 176
×
144.
Reference
page
3
23
––
11
11
6
6
6
6
39
Others
Checking communication/connection
By using the PING command standard to Windows, it is possible to check whether the connection is correct and that communication
can be made from the PC to KA-DV300.
1.
Launch the command prompt.
●
For Windows 2000
From the Start button, select [Programs]
→
[Accessories]
→
[Command Prompt].
2.
Input the following and press the Enter key.
PING xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx is the IP address of the other party)
Input example: When the IP address of the other party is "192.168.0.10"
PING 192.168.0.010
3.
Check to see that the other party is successfully displayed.
If connection is not successful, “Request timed out” or “Destination host unreachable” message will appear.
