ENGLISH
4
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
GETTING STARTED
Cancel the demonstration
When you turn on the power for the first time (or
[FACTORY RESET]
is set
to
[YES]
), the display shows: “CANCEL DEMO” “PRESS ENTER”.
1
Press
.
[YES]
is selected for the initial setup.
2
Press
again.
“DEMO
OFF”
appears.
Set the clock and date
1
Press and hold
.
2
Press
to select
[CLOCK]
, then press
.
To adjust the clock
3
Press
to select
[CLOCK ADJUST]
, then press
.
4
Press
to make the settings, then press
.
Hour Minute
5
Press
to select
[CLOCK FORMAT]
, then press
.
6
Press
to select
[12H]
or
[24H]
, then press
.
To set the date
7
Press
to select
[DATE SET]
, then press
.
8
Press
to make the settings, then press
.
Day Month Year
9
Press
to exit.
To return to the previous setting item, press
.
1
Set the basic settings
1
Press and hold
.
2
Press
to select an item (see the following table), then press
.
3
Repeat step
2
until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
XX
SYSTEM
KEY BEEP
(Not applicable when 3-way crossover is selected.)
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
SOURCE SELECT
AM SRC
*
ON
: Enables AM in source selection. ;
OFF
: Disables.
( 7)
BUILT-IN AUX
*
ON
: Enables AUX in source selection. ;
OFF
: Disables.
( 18)
F/W UPDATE
UPDATE SYSTEM/UPDATE DAB1/UPDATE DAB2
F/W UP xxxx/
F/W UP xxxxx/
F/W UP Vxxx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
FACTORY RESET
YES
: Resets the settings to default (except the stored station). ;
NO
: Cancels.
*
Not displayed when the corresponding source is selected.
3
2
JS_JVC_KD_DB98BT_E_EN_3.indd 4
JS_JVC_KD_DB98BT_E_EN_3.indd 4
11/28/2016 12:13:52 PM
11/28/2016 12:13:52 PM
