8
ENGLISH
BASIC OPERATIONS
Turning on the power
1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step
2
below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
Each time you press the button,
the source changes as follows.
*
1
Without connecting the DAB tuner or CD
changer, you cannot select it as the source to
play.
*
2
If a disc is not in the loading slot, you cannot
select “DISC” as the source to play.
*
3
To select “LINE IN,” select “Line In” for the
“Ext Input” setting on page 60.
3
Adjust the volume.
4
Adjust the sound as you want. (See
pages 54 – 56.)
Note:
While playing a source, you can also show the level
meter on the display. For details, see “Activating the
level meter” on page 10.
To drop the volume in a moment
Press
briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press
for more than 1 second.
•
If you turn off the power while listening to a
disc,
playback will start from where playback
has been stopped previously, next time you
turn on the power.
SRC
Current sound (iEQ) mode (see page 55)
Volume level appears.
*
1
*
2
*
3
3
4
5
6
T/P
2
1
D
SRC
DISP
ATT
SEL
MODE
M
1, 3
2
DAB
DISC
CD-CH or LINE IN
(CD changer)
TUNER
ATT
ATT
*
1
EN08-10DV5000[E]f.p65
03.3.23, 18:47
8
