18
ENGLISH
You can assign titles to CDs (both in the unit
and the CD changer). You can assign up to 30
discs and each title up to 32 characters.
• You cannot assign a title to a CD Text, an
MP3/WMA disc, or a USB memory.
1
Select the sources.
• For CDs in this unit: Insert a CD.
• For CDs in the CD changer: Select
“CD-CH,” then select a disc number.
2
Enter the title assignment mode.
3
Assign a title.
1
Select a character.
2
Move to the next (or previous)
character position.
3
Repeat steps
1
and
2
until you
finish entering the title.
4
Finish the procedure.
To erase the entire title
In step
2
on the left...
Available characters
Indications
Selectable settings, [reference page]
TAG DISP
Tag display
TAG ON
:
[Initial];
Shows the Tag information while playing MP3/
WMA tracks, [14].
TAG OFF
:
Cancels.
AMP GAIN
Amplifier gain control
You can change the maximum volume level of this unit.
LOW PWR :
VOL 00 – VOL 30 (Select this if the maximum power of
the speaker is less than 50 W to prevent them from being
damaged.)
HIGH PWR :
[Initial];
VOL 00 – VOL 50
IF BAND
Intermediate frequency
filter
AUTO
:
[Initial];
Increases the tuner selectivity to reduce
interference noises between close stations. (Stereo effect
may be lost.)
WIDE
:
Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect
will remain.
Ex.: When “CD“ is selected as the source
Title assignment
EN18-23_KD-G722[EY]_006A_f.indd 18
EN18-23_KD-G722[EY]_006A_f.indd 18
12/15/05 11:38:00 AM
12/15/05 11:38:00 AM
