28
ENGLISH
Menu item
Selectable setting, [
Initial:
Underlined
]
Dimmer
Dimmer Set Auto
:
Changes the display and button illumination between the Day/Night adjustments in
<Brightness>/<Color Setup> setting when you turn off/on the car headlights
*
2
. /
Time Set
:
Sets the start/end timer for dimmer. Turn the control dial to adjust the start
time, then press the control dial to confirm. Repeat this step to enter the end time. /
On
:
Selects the Night adjustments in <Brightness>/<Color Setup> setting
for the display and button illumination. /
Off
:
Selects the Day adjustments in
<Brightness>/<Color Setup> setting for the display and button illumination.
Brightness
Day
[
23
] /
Night
[
11
] : Customizes the display and button illumination brightness
level [
00
—
31
] for day and night.
• Pressing
BRIGHTNESS
can enter <Day Brightness> or <Night Brightness> menu
directly.
Display
Scroll
*
3
Once
: Scrolls the displayed information once. /
Auto
: Repeats scrolling (at 5-second
intervals). /
Off
: Cancels.
(Pressing
DISP
for more than one second can scroll the display regardless of the setting.)
Tag Display On
: Shows the Tag information while playing MP3/WMA/WAV tracks. /
Off
: Cancels.
LCD Type
Negative
: Negative pattern of the display. /
Positive
: Positive pattern of the display. /
Auto
: Positive pattern will be selected during the day time
*
4
; while negative pattern will
be used during the night time
*
4
.
Contrast
Level
01
—
Level
08
[
Level 05
] : Adjust the display contrast to make the display
indications clear and legible.
EQ/DSP
EQ
For settings, see page 23.
Time
Alignment
For settings, see page 24.
D. T.
Expander
*
5
On
: Digital Track Expander feature compensates high frequency sound for compressed
digital tracks (eg. digital music sources). /
Off
: Cancels.
• Digital Track Expander effect can be heard in the following conditions:
MP3/WMA: Bit rate: 64 kbps to 128 kbps; Sampling frequency: 44.1 kHz, 48 kHz only
iPod/iPhone music files: Sampling frequency: 44.1 kHz, 48 kHz only
Audio
Fad/Bal
*
6,
*
7
Fad
(fader) :
F6 — R6
[
0
] : Press
5
/
∞
to adjust the front and rear speakers output
balance. /
Bal
(balance) :
L6 — R6
[
0
] : Press
4
/
¢
to adjust the left
and right speakers output balance.
Loud
*
8
Loud1/
2/
3
: Boost low and high frequencies to produce a well-balanced sound at a low
volume level. /
Off
: Cancels.
*
2
The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting
may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case,
change the setting to any other than <Dimmer Auto>.
*
3
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
4
Depends on the <Dimmer Set> setting.
*
5
No effect in case of CD-DA or Bluetooth audio.
*
6
If you are using a two-speaker system, set the fader level to <00>.
*
7
This adjustment will not affect the subwoofer output.
*
8
If SOUND 1/ 2/ 3 is selected as the sound mode (page 23), you cannot make any setting. “Fix (My Sound)”
appears.
EN02-37_KD-R921BT_003A_2.indd 28
EN02-37_KD-R921BT_003A_2.indd 28
2/9/11 9:54:44 AM
2/9/11 9:54:44 AM
