KD-SC900R
1-6 (No.49829)
2.1.5
Removing the rear bracket
(See Fig.8)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink and bottom
cover.
(1) Remove the three screws
E
, one screws
F
and two screws
G
on the back of the body.
(2) Remove the rear bracket.
Fig.8
2.1.6
Removing the main board
(See Fig.9)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink, bottom
cover and rear bracket.
(1) Remove the two screws
H
attaching the main board.
(2) Disconnect connector CN501 and remove the main board.
Fig.9
2.1.7
Removing the CD mechanism assembly
(See Fig.10)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink, bottom
cover, rear bracket and main board.
Fig.10
G
E
E
F
Rear bracket
G
Insert Subwoofer and steering
cables into the slots.
Main board
H
H
CN501
J
J
CD mechanism assembly
Top chassis
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299