manualshive.com logo in svg

JVC KD SH1000 - Radio / CD, Instructions Manual

The JVC KD SH1000 is a versatile Radio/CD unit that combines state-of-the-art sound with reliable performance. Enhance your car audio experience with its crystal-clear reception and powerful sound output. Need help setting it up? Download the Instructions Manual for free from 88.208.23.73:8080 to make the most out of this impressive device.

Share
Download
background image

5

Anda dapat menikmati sebuah dunia dari “audio murni” dalam mobil Anda dengan menyambungkan 
sistem speaker 3-arah (cakupan-tinggi/cakupan-sedang/subwoofer).

PENTING:

Jika Anda telah memasang sistem speaker 3-arah dalam mobil Anda, pastikan hal-hal 
berikut:

•  Sambungkan sistem speaker, seperti diilustrasikan di bawah.
•  Sebelum menggunakan sistem, aktifkan jaringan seberangan (crossover network) dan atur awal 

frekuensi-frekuensi pancung yang tepat untuk HPF/LPF (khususnya untuk HPF); sebaliknya, hal 
tersebut dapat merusak speaker-speaker.

•  Untuk lebih jelas mengenai pengaturan, lihat halaman 18 dan 19 dari BUKU PETUNJUK.

You can enjoy a world of “pure audio” in your car by connecting 3-way network speaker system 
(high-range/mid-range/subwoofer).

IMPORTANT:

If you have installed the 3-way network speaker system in the car, make sure of the 
following.

•  Connect the speaker system as illustrated below.
•  Before using the system, activate crossover network and preset the appropriate cutoff frequencies 

for HPF/LPF (especially for HPF); otherwise, it may damage the speakers.

•  For details about the setting, see pages 18 and 19 of the INSTRUCTIONS.

C

Speaker connections for 3-way network speaker system / Penyambungan speaker untuk sistem speaker 3-arah

Right high-range speaker

Speaker kanan cakupan-tinggi

Remote lead (Blue with white stripe)

Ujung jauh (Biru dengan strip putih)

Y-connector (not supplied for this unit) 

Konektor Y (tidak disediakan untuk alat penerima ini)

Left high-range speaker

Speaker kiri cakupan-tinggi

Connecting subwoofer / Menyambungkan subwoofer 

Remote lead

Ujung jauh

White with black stripe

Putih dengan strip hitam

White

Putih

Gray with black stripe

Abu-abu dengan strip hitam

Gray

Abu-abu

Green with black stripe

Hijau dengan strip hitam

Green

Hijau

Purple with black stripe

Ungu dengan strip hitam

Purple

Ungu

Left mid-range speaker

Speaker kiri cakupan-sedang

Right mid-range speaker

Speaker kanan cakupan-sedang

When connecting the speakers (high-range/mid-range) through the speaker output

Ketika menyambungkan speaker-speaker (cakupan-tinggi/cakupan-sedang) melalui keluaran speaker

When connecting the speakers (high-range/mid-range) through the external amplifiers—to 
obtain more powerful sound

Ketika menyambungkan speaker-speaker (cakupan-tinggi/cakupan-tengah) melalui penguat-
penguat eksternal—untuk memperoleh suara yang sangat kuat

Subwoofer

Subwoofer

To subwoofer out

Ke keluaran subwoofer

To LINE OUT (REAR)

Ke LINE OUT (REAR)

To LINE OUT (FRONT)

Ke LINE OUT (FRONT)

*

3

  Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the 

wire). Failure to do so may cause damage to the unit.

*

3

  Pasangkan dengan kuat kabel tanah ke bodi besi atau ke casis dari mobil—pada tempat yang tidak dilapisi cat (jika dilapisi cat, hilangkan cat sebelum memasang kabel). 

Kegagalan melakukan ini mungkin menyebabkan kerusakan pada alat penerima tersebut.

*

4

  Signal cord (not supplied for this unit)

*

4

  Kabel sinyal (tidak disediakan untuk alat penerima 

ini)

JVC Amplifier

Penguat JVC

JVC Amplifier

Penguat JVC

JVC Amplifier

Penguat JVC

Right high-range speaker

Speaker kanan cakupan-tinggi

Left high-range speaker

Speaker kiri cakupan-tinggi

Left mid-range speaker

Speaker kiri cakupan-sedang

Right mid-range speaker

Speaker kanan cakupan-sedang

Instal4-6_SH1000U_009A_f.indd   5

Instal4-6_SH1000U_009A_f.indd   5

2/14/06   3:08:40 PM

2/14/06   3:08:40 PM

Summary of Contents for KD SH1000 - Radio / CD



























































































































































































































































































Reviews:

No comments

Related manuals for KD SH1000 - Radio / CD

Magnadyne M11 Manual preview
M11
Brand: Magnadyne Pages: 36
Retekess TT101 Instructions preview
TT101
Brand: Retekess Pages: 2
Sab Satellite Titan III Combo HD User Manual preview
Titan III Combo HD
Brand: Sab Satellite Pages: 43
Olin HVBTR?4800 Quick Manual preview
HVBTR?4800
Brand: Olin Pages: 14
Hammarlund HQ-180A Series Technical Description, Test And Operating Instructions preview
HQ-180A Series
Brand: Hammarlund Pages: 73
Sound Storm SD877BI User Manual preview
SD877BI
Brand: Sound Storm Pages: 19
Jensen VX7014 Operating Instructions Manual preview
VX7014
Brand: Jensen Pages: 100
Integra A2111 Instruction Manual preview
A2111
Brand: Integra Pages: 54
Magtek DynaPAD Quick Installation Manual preview
DynaPAD
Brand: Magtek Pages: 2
Xantech Micro Link 490D Series Installation Instructions preview
Micro Link 490D Series
Brand: Xantech Pages: 4
Icom IC0PCR1000 Service Manual preview
IC0PCR1000
Brand: Icom Pages: 53
MAC Audio MAC 410 Owner'S Manual/Warranty Document preview
MAC 410
Brand: MAC Audio Pages: 200
V.TOP U3CR01 Operating Instruction preview
U3CR01
Brand: V.TOP Pages: 9
Lindy 42834 User Manual preview
42834
Brand: Lindy Pages: 4
Ingenico Moby/8500 User Manual preview
Moby/8500
Brand: Ingenico Pages: 10
Radial Engineering BT-PRO V2 User Manual preview
BT-PRO V2
Brand: Radial Engineering Pages: 12
Perry 1PARXGPS01 Manual preview
1PARXGPS01
Brand: Perry Pages: 12
Sytech SY-3133T2 User Manual preview
SY-3133T2
Brand: Sytech Pages: 27

Brands by name

Popular brands

Load more brands