ENGLISH
19
Other external component
operations
You can connect an external component to
the LINE IN plugs on the rear, and another to
the CD changer jack on the rear using the Line
Input Adapter—KS-U57 (not supplied) or AUX
Input Adapter—KS-U58 (not supplied).
• For connection, see Installation/Connection
Manual (separate volume).
For listening to the iPod or D. player, refer to
pages 17 and 18.
~
If “EXT IN” does not appear, see page 16
and select the external input (“EXT IN”).
Ÿ
Turn on the connected component
and start playing the source.
!
Adjust the volume.
⁄
Adjust the sound as you want. (See
page 14.)
To check the other information while
listening to an external component
Clock
Ô
EXT IN
Maintenance
How to clean the connectors
Frequent detachment will deteriorate the
connectors.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
Moisture condensation
Moisture may condense on the lens inside the
VCD/CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the VCD/CD player may
malfunction. In this case, eject the disc and
leave the unit turned on for a few hours until
the moisture evaporates.
How to handle discs
When removing a disc from
its case,
press down the center
holder of the case and lift the
disc out, holding it by the edges.
• Always hold the disc by the
edges. Do not touch its recording surface.
When storing a disc into its case,
gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs into the cases after
use.
Center holder
Connector
Continued on the next page...
EN14-19_KD-SV3205[UN]_3.indd 19
EN14-19_KD-SV3205[UN]_3.indd 19
1/18/06 9:47:25 AM
1/18/06 9:47:25 AM
