4
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
GETTING STARTED
Cancel the demonstration
When you turn on the power for the first time (or after you reset the unit),
the display shows: “CANCEL DEMO” “PRESS ENTER”
1
Press
*
ENTER.
[YES]
is selected for the initial setup.
2
Press
*
ENTER again.
“DEMO OFF” appears.
Set the clock and date
1
Press and hold
.
2
Press VOL +/– to select
[CLOCK]
, then press
*
ENTER.
To adjust the clock
3
Press VOL +/– to select
[CLOCK ADJUST]
, then press
*
ENTER.
4
Press VOL +/– to make the settings, then press
*
ENTER.
Hour Minute
5
Press VOL +/– to select
[CLOCK FORMAT]
, then press
*
ENTER.
6
Press VOL +/– to select
[12H]
or
[24H]
, then press
*
ENTER.
To set the date
7
Press VOL +/– to select
[DATE SET]
, then press
*
ENTER.
8
Press VOL +/– to make the settings, then press
*
ENTER.
Day Month Year
9
Press
to exit.
1
2
To return to the previous setting item, press
.
Set the basic settings
1
Press and hold
.
2
Press VOL +/– to select an item (see the following table), then press
*
ENTER.
3
Repeat step 2 until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[SYSTEM]
[KEY BEEP]
[ON]
: Activates the keypress tone. ;
[OFF]
: Deactivates.
[SOURCE SELECT]
[AM SRC]
*
[ON]
: Enables AM in source selection. ;
[OFF]
: Disables. (Page 5)
[BUILT-IN AUX]
*
[ON]
: Enables AUX in source selection. ;
[OFF]
: Disables. (Page 7)
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx]
[YES]
: Starts upgrading the firmware. ;
[NO]
: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<http://www.jvc.net/cs/car/>.
* Not displayed when the corresponding source is selected.
3
JS_JVC_KD_X168M_M2_EN_1.indd 4
JS_JVC_KD_X168M_M2_EN_1.indd 4
19/6/2018 11:42:42 AM
19/6/2018 11:42:42 AM
