ENGLISH
7
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
HD Radio™ Tuner
(for KD-X480BHS)
You can tune in to both conventional and HD Radio broadcasts.
• To find HD Radio stations in your area, visit <http://www.hdradio.com>.
Search for a station or channel
1
Press
B
SRC repeatedly to select FM or AM.
2
Press and hold
to select the tuning mode.
•
[HD SEEK]
:
Search for HD Radio broadcast only.
•
[MANUAL SEEK]
: Search for both conventional and HD Radio broadcasts.
3
Press
S
/
T
(or press
H
/
I
on the remote control) to search for a
station or channel automatically.
(or)
Press and hold
S
/
T
(or press and hold
H
/
I
on the remote
control) until “M” flashes, then press repeatedly to search for a station
or channel manually.
Settings in memory
You can store up to 18 stations/channels for FM and 6 stations/channels for
AM.
Store a station or channel
While listening to a station or channel...
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until “PRESET MODE” flashes.
2
Turn the volume knob to select a preset number, then press the knob.
“MEMORY” appears once the station or channel is stored.
Select a stored station or channel
Press one of the number buttons (1 to 6).
(or)
1
Press
to enter HD search select mode.
2
Turn the volume knob to select
[PRESET LIST]
, then press the knob.
3
Turn the volume knob to select a preset number, then press the knob.
Select a HD Radio multicast channel
Many HD Radio stations offer more than one channel programming. This
service is called multicasting.
While receiving HD Radio multicast channels...
Press
S
/
T
to select your desired channel (HD1 to HD8).
“LINKING” appears while linking to a multicast channel.
Emergency Alert message
You can receive an emergency alert message while listening to another
source via HD Radio Broadcast.
• To activate/deactivate emergency alert message reception, see
[EA]
of the
[TUNER SETTING]
. (Page 8)
Receive an emergency alert message
When an emergency alert message is received, it appears and remains on
the display until the user performs the “Ignore” function.
Press
B
SRC (or press SOURCE on the remote control) to ignore the alert
message.
The same emergency alert message will not interrupt again for 12 hours.
KD-X480BHS_K_B5A-3881-00_EN_2nd Draft.indd 7
KD-X480BHS_K_B5A-3881-00_EN_2nd Draft.indd 7
25/8/2021 3:37:59 PM
25/8/2021 3:37:59 PM
