28
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Audio Settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[EQ SETTING]
[PRESET EQ]
Selects a preset equalizer suitable to the music genre.
• Select
[USER]
to use the settings made in
[EASY EQ]
or
[PRO EQ]
.
[FLAT]
/
[DRVN 3]
/
[DRVN 2]
/
[DRVN 1]
/
[HARD ROCK]
/
[HIP HOP]
/
[JAZZ]
/
[POP]
/
[R&B]
/
[USER]
/
[CLASSICAL]
Drive equalizer (
[DRVN 3]
/
[DRVN 2]
/
[DRVN 1]
) boosts specific frequencies
in the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
[EASY EQ]
Adjusts your own sound settings.
• The settings are stored to
[USER]
in
[PRESET EQ]
.
• The settings made may affect the current settings of
[PRO EQ]
.
[SUB.W SP]
*1*2:
[00]
to
[+06]
(Default:
[+03]
[SUB.W]
*1:
[–50]
to
[+10]
[00]
[BASS]
:
[LVL–09]
to
[LVL+09]
[LVL 00]
[MID]
:
[LVL–09]
to
[LVL+09]
[LVL 00]
[TRE]
:
[LVL–09]
to
[LVL+09]
[LVL 00]
)
[PRO EQ]
Adjusts your own sound settings for each source.
• The settings are stored to
[USER]
in
[PRESET EQ]
.
• The settings made may affect the current settings of
[EASY EQ]
.
[62.5HZ]
[LEVEL –09]
to
[LEVEL +09]
(
[LEVEL 00]
): Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
[ON]
: Turns on the extended bass. ;
[OFF]
: Cancels.
[100HZ]
/
[160HZ]
/
[250HZ]
/
[400HZ]
/
[630HZ]
/
[1KHZ]
/
[1.6KHZ]
/
[2.5KHZ]
/
[4KHZ]
/
[6.3KHZ]
/
[10KHZ]
/
[16KHZ]
[LEVEL –09]
to
[LEVEL +09]
(
[LEVEL 00]
): Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
[Q FACTOR]
[1.35]
/
[1.50]
/
[2.00]
: Adjust the quality factor.
[AUDIO CONTROL]
[BASS BOOST]
[LEVEL +01]
to
[LEVEL +05]
: Selects your preferred bass boost level. ;
[OFF]
: Cancels.
[LOUDNESS]
[LEVEL 01]
/
[LEVEL 02]
: Boosts low or high frequencies to produce a well-
balanced sound at low volume. ;
[OFF]
: Cancels.
[SUB.W
LEVEL]
*1
[SPK-OUT]
*2
(Not applicable when 3-way crossover is selected.)
[SUB.W 00]
to
[SUB.W +06]
(
[SUB.W +03]
): Adjusts
the output level of the subwoofer connected via speaker
lead. (Page 42)
[PRE-OUT]
[SUB.W –50]
to
[SUB.W +10]
(
[SUB.W 00]
): Adjusts
the output level of the subwoofer connected to the
lineout terminals (SW) through an external amplifier.
(Page 43)
[SUBWOOFER
SET]
[ON]
: Turns on the subwoofer output. ;
[OFF]
: Cancels.
*1, *2: (see page 29)
KD-X480BHS_K_B5A-3881-00_EN_2nd Draft.indd 28
KD-X480BHS_K_B5A-3881-00_EN_2nd Draft.indd 28
25/8/2021 3:38:02 PM
25/8/2021 3:38:02 PM
