12
Operations from the remote controller
• From the remote controller, playback mode selection is not available. Perform the operation on
the control panel to select a playback mode.
You can control the iPod using the remote controller supplied with your receiver.
Examples:
How the buttons on the remote controller work as the
iPod’s controls
• The illustrations of RM-RK300 are used as examples.
Basic operation
To select a track:
• Press
¢
(or
3
) to go to the next tracks.
• Press
4
(or
2
) to go to the beginning of the
current track and the previous tracks.
To fast-forward or reverse a track:
• Press and hold
¢
(or
3
) to fast-forward.
• Press and hold
4
(or
2
) to reverse.
To pause or resume playback:
Press
∞
.
Each time you press the button, the playback
pauses and resumes alternately.
Selecting a track from the “Music” menu
1
Press
5
to enter the “Music” menu.
• Now the buttons on remote controller work
as the menu selecting buttons.
*
2
Press
¢
/
4
(or
3
/
2
) to select an item,
then press
∞
to confirm the selection.
When the selected item has a next layer, you
will enter the layer. Repeat the procedure until
the desired track is confirmed.
• You can skip 10 items at a time by pressing
and holding
¢
/
4
(or
3
/
2
).
• To move back to the previous layer, press
5
.
*
The menu selecting mode will be canceled;
– If no operations are done for about 5 seconds.
– When you confirm the selection of a track.
During playback
When selecting a track from the “Music” menu
38
(Play/Pause)
MENU
(Enters the “Music” menu)
Functions the same as
the iPod operation
Select
(Confirms the selection)
MENU
(Moves back to the previous layer)
RM-RK230
RM-RK300
RM-RK50
Click Wheel
(Selects
the next items)
Click Wheel
(Selects
the previous items)
