work correctly. Refer to "How to Install" for the loosening of
fixing knob, installation orientation, installation angle, and
other information and then install the device correctly.
Do not install the device near a digital terrestrial television
antenna or an electrical component. Doing so may reduce
television receiver sensitivity or cause flickering and noise.
Use a commercially available cleaning cloth or the like to wipe
off all dirt and grease on the mounting surface and then fix
the mount base in place. If the device is re-affixed or mounted
using, for example, general-purpose double-sided tape, the
adhesion strength may weaken and cause the device to fall.
After mounting the device, leave it for 24 hours before use to
enable the mounting strength of the mount bracket to
improve. Failing to do so may result in the adhesion of the
mount bracket becoming weak and the device falling.
Fix the cord in place with tape or the like so that it does not
interfere with driving.
Precautions for Use
Do not block the camera lens, get dirt on it, or place a
reflective object near it.
When LED traffic lights are recorded, video in which they
appear to be flickering or flashing may be recorded.
JVCKENWOOD assumes no responsibility with regard to the
distinguishing or recording of traffic lights.
If coating is used on the windshield of the vehicle, recording
quality may be affected.
There is no guarantee that the device can record video in all
conditions.
Others
About software
This device includes the software owned by following third parties.
Following condition of the license is applicable to each software.
Konatu Font
Copyright (c) 2012 MASUDA mitiya
Applicable license :M IT License
libupnp
Copyright (c) 2000-2003 Intel Corporation
Applicable license :B SD 3-Clause "New" or "Revised" License
