46
ENGLISH
Setting menu items
• When changing settings for <
Amplifier Gain
>, <
AV Input
> and <
Input
> setting in <
Navigation Input
>,
turn off the AV source. For other settings, change them when the AV source is turned on.
Menu item
Selectable setting/item
Initial:
Underlined
Audio
Fader/Balance
Fader
: Adjust the front and rear speaker output balance.
♦
F6
to
R6
; Initial
0
• When using a two-speaker system, set the fader to the center (
0
).
Balance
: Adjust the left and right speaker output balance.
♦
L6
to
R6
; Initial
0
Press [
5
/
∞
/
2
/
3
] or drag [
] to adjust.
• To clear the adjustment, press [
Center
].
Equalizer
Change the sound mode or adjust and store the equalization for each source.
(
☞
page 39)
♦
Flat/Natural/Dynamic
/
Vocal Boost
/
Bass Boost
/
Vibrant
/
User
Loudness
You can activate/deactivate loudness.
♦
On
♦
Off
: Boost low and high frequencies to produce a well-
balanced sound at a low volume level.
: Cancels.
Crossover
Adjust the crossover frequency. (
☞
page 40)
Volume Adjust
Adjust and store the auto-adjustment volume level for each source. (For
discs, the adjustment is stored for each of the following categories: DVD/
DVD-VR, VCD/CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.) The volume
level will automatically increase or decrease when you change the source.
♦
–15
to
+6
; Initial
0
Amplifier Gain *
♦
On
: Activates the built-in amplifier.
♦
Off
: Deactivates the built-in amplifier.
Speaker Select
Select the size of the connected speaker.
♦
Standard/Narrow/Middle/Wide
*
To change the setting, turn off the AV source by pressing [
AV Off
] on <
AV Menu
> screen beforehand.
EN_KW-AV60JJW.indb 46
EN_KW-AV60JJW.indb 46
11/12/12 16:19
11/12/12 16:19