(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
1
2
3
Repeat step 2 if necessary.
To return to the previous menu, press
.
To exit from the menu, press
DISP
or
MENU
.
Menu item
Selectable setting (Initial: [XX])
DEMO
For settings,
'
page 4.
CLOCK
COLOR
For settings,
'
page 10. (KW-R500 only)
COLOR SETUP
DIMMER
DIMMER SET
Selects the display and button illumination adjusted in the
<
BRIGHTNESS
>
/
<
COLOR SETUP
>
setting.
[AUTO]
: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *1
ON
: Selects the Night adjustments.
OFF
: Selects the Day adjustments.
BRIGHTNESS
DAY
[31]
/
NIGHT
[15]
: Brightness settings for the display and button
illumination for day and night.
BUTTON ZONE
/
DISP ZONE
: Sets the brightness levels
00 — 31
.
DISPLAY
SCROLL
*2
[ONCE]
: Scrolls the display information once.
AUTO
: Repeats scrolling (at 5-second intervals).
OFF
: Cancels.
TAG DISPLAY
[ON]
: Shows the TAG information while playing MP3/WMA tracks.
OFF
: Cancels.
PRO EQ
For settings,
'
page 11.
AUDIO
FADER
*3*4
R06 — F06
[00]
: Adjusts the front and rear speaker output balance.
BALANCE
*4
L06 — R06
[00]
: Adjusts the left and right speaker output balance.
LOUD
(Loudness)
ON
: Boosts low and high frequencies to produce a well-balanced sound at
a low volume level.
[OFF]
: Cancels.
VOL ADJUST
(Volume adjust)
-05 — +05
[00]
: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. (
“
VOL ADJ FIX
”
appears if
“
FM
”
is selected.)
L/O MODE
(Line output
mode)
Select if the LINE OUT (REAR) terminals on the rear panel are connected to
the speakers or subwoofer through an external amplifier.
SUB.W
: Subwoofer
[REAR]
: Speakers
*1
The illumination control lead connection is required. (See “Installation/Connection Manual”.)
This setting may not work correctly on some vehicles (particularly on those having a control
dial for dimming). In this case, change the setting to other than <DIMMER AUTO>.
*2
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*3
If you are using a two-speaker system, set the fader level to “00”.
*4
This adjustment will not affect the subwoofer output.
Menu operations
Menu operations
12
|
ޓ
ENGLISH
2011/12/5
ޓ
17:9:10
KW-R500_U_EN
