E-34
Function/Variable Values
For setting the white balance mode.
“AUTO 1”
: Set to this to enable automatic adjustment of white balance.
“AUTO 2”
AUTO 2 Equipped with 2 modes (“AUTO 1” and “AUTO 2”).
☞
Page 20 ‘White Balance Adjustment’
“LEVEL(R)” and “LEVEL(B)” items allow fine-tuning of white
colour upon achieving white balance.
“FAW”
: Automatic adjustment of white balance according to different
illumination conditions.
“MANUAL”
: Manual adjustment of white balance.
Can be altered using the “LEVEL(R)” and “LEVEL(B)” items.
“PRESET”
: Fixes white balance at 3200 K.
For adjusting the reddishness of white balance when “WHITE BALANCE” is set to
“AUTO” or “MANUAL”.
Increase value
: Increases reddishness on screen.
Decrease value : Decreases reddishness on screen.
{Variable Values During “AUTO”: –32 -
0
- +31}
{Variable Values During “MANUAL”: 0 -
128
- 255}
For adjusting the bluishness of white balance when “WHITE BALANCE” is set to
“AUTO” or “MANUAL”.
Increase value
: Increases bluishness on screen.
Decrease value : Decreases bluishness on screen.
{Variable Values During “AUTO”: –32 -
0
- +31}
{Variable Values During “MANUAL”: 0 -
128
- 255}
Item
“WHITE
BALANCE”
“LEVEL(R)”
“LEVEL(B)”
5. Setting Via the Menu Screen (continued)
“WHITE BALANCE” Screen
Note
Selection of “LEVEL(R)” and “LEVEL(B)” items is disabled when the “WHITE BALANCE” item is set to
“PRESET”. (Displayed as “- - - - - -”)
Settings in bold are factory settings
