E-44
MENU
AW BARS
SET
LENS
REMOTE
GENLOCK IN
VIDEO OUT
POWER
DC IN
SEE INSTRUCTION MANUAL
RM-LP55
REMOTE CONTROL UNIT
FUNC 1
FUNC 2
W.PAINT
GAIN
SHUTTER IRIS MANU OPERATE
MENU
FUNC 1
FUNC 2
ENTER
/SET
FILE
W.BAL
GAIN
SHUTTER
FOCUS
NEAR
FAR
ZOOM
WIDE
TELE
SLOW
FAST
Connection
Connect cable of the remote control unit to the
[REMOTE] terminal of this unit.
Operation
1.
Press the [ENTER/SET] and [FAR] buttons at
the same time when turning the [OPERATE]
switch to [ON].
Display on LCD screen will be as shown in the
following diagram.
2.
Use the [MENU
§
/
∫
] buttons to display the
“CAMERA TYPE” setting screen.
Display on LCD screen will be as shown in the
following diagram.
Connecting the Remote Control Unit
6. Others
Menu function of the camera can be set using the remote control unit (RM-LP55 AND RM-LP57). (For
further details, please refer to the instruction manual of the remote control.)
3.
Use the [FUNC2
§
/
∫
] buttons to set the camera
type setting no. to “3”.
4.
Pressing the [ENTER/SET] button returns to the
normal mode of use after “INITIALIZE” is dis-
played.
Notes
●
In the case when the menu function of this unit is
identical to the remote control unit, the switch func-
tion of the remote control will override that of this
unit.
●
FOCUS and ZOOM cannot be adjusted using the
remote control unit.
●
When connected to RM-LP55, even if the
“V.SCAN” under “SHUTTER” item is set to 1/50.0,
the camera will operate based on 1/50.1.
As such, the image level will change if the “STEP”
mode under “SHUTTER” item is changed from
NORMAL (1/50) to “V.SCAN”.
RM-LP55
[MENU
§
/
∫
]
[ENTER/SET]
[FAR]
[FUNC2
§
/
∫
]
AUTO IRIS LEVEL
ON
CAMERA TYPE
1
Camera Type
Setting No.
When operating the menu function of this unit from RM-LP55
Set the “CAMERA TYPE” setting no. of RM-LP55 to “3”.
