6
2. CONTROLS, INDICATIONS AND CONNECTORS (Cont’d)
12
Set up switch
This switch changes the FILE setting and the RANDOM
TRGGER setting. Change the setting according to the de-
sired use.
Camera Control [Panel side] (Cont’d)
Connector view from the main unit front
(20-pin connector, female)
Pin No.
Signal
Pin No.
Signal
1
2
3
4
5
6
7
8
9
10
GND
WEN
B
CLK
DATA
CS HE
SHCT
IFHB
IFVS
G
11
12
13
14
15
16
17
18
19
20
CS LE
IRIS CTL/IRIS Y
–10V
–5V
R
VIDEO SHIELD
20V
15V
5.5V
LENS GND
1
20
2
16
5
19
6
11
10
15
15
[PAINT R] paint R adjust knob
This is the knob which adjusts the R(Red) level of the paint
and manual white balance.
Turning the knob to the right will increase red.
For the adjust knob
15
and
16
, refer to the “MANUAL OP-
ERATION” on page 17.
16
[PAINT B] paint B adjust knob
This is the knob which adjusts the B (Blue) level of the paint
and manual white balance.
Turning the knob to the right will increase blue .
17
[WHITE PAINT SET]
When this button is pressed, it becomes AUTO WHITE mode.
Refer to the “WHITE BALANCE ADJUSTMENT” on page 13.
13
COVER
To carry out the menu operation, pull the cover towards you
to open it.
14
[TO CAMERA] camera connector
Connect the camera head with the provided cable (5m).
1
ON
c
2
3
4
SW3
RANDOM TRIGGER setting
Refer to "Random Trigger Function" on page 28.
SW1, 2
FILE setting
Refer to "FILE SETTING" on page 15.
SW4
Not available
18
[VIDEO LEVEL FULL AUTO] full auto button and its LED
This adjusts the video level automatically by varying iris,
shutter speed and GAIN (electrical sensitization) automati-
cally according to the brightness of an object.
The LED light during Full/Auto mode. Each time the button is
pressed, the ON/OFF function operates in turn.
• Auto adjustment for iris can be performed only when an
auto iris lens is used and the LENS item is set to AUTO.
• Max. GAIN value for the ALC can be set at the MENU
screen.
For the
18
and
19
, refer to the “MANUAL OPERATION” on
page 17.
19
[LEVEL] video level adjust knob
This knob varies video level. Turning it to the right increases
the video level and turning it to the left reduces the video
level.
