JVC KY-PZ400NBE, Instructions Manual

Infrared Remote Control

.

FAST

P/T RST

L/R SET

AUTO

FAR

NEAR MANUAL

BACKLIGHT

FOCUS

SLOW

ZOOM

RESET

MENU

PRESET

CAMERA SELECT

STD

1

F1

F2

F3

F4

1

2

3

4

2

3

4

5

6

7

8

9

0

REV

HOME

Q

O

M

A

B

F

H

L

N

D

E

K

P

J

C

G

I

A

STANDBY button

Switches between the standby and normal

modes.

Memo : 

Power consumption in the standby mode is

approximately half of that in the normal mode.

B

NUMBER button

For preset configuration or invoking a preset

number.

C

Z

 button

To be used together with other buttons.

D

PRESET button

Stores the preset position.

[SET PRESET] + NUMBER button (1 to 9):

Stores the preset position in the selected

NUMBER button.

Memo : 

Press the buttons above in sequence.

E

HOME button

Restores the orientation of the camera to face

the front.

Functions as a confirmation button when the

menu is displayed.

F

RETURN button

Functions as a cancel button when the menu is

displayed.

G

ZOOM button

SLOW ZOOM:

Zooms in [+] or zooms out [-] the camera at a

low speed.

FAST ZOOM:

Zooms in [+] or zooms out [-] the camera at a

high speed.

H

L/R SET button

Press the button together with the NUMBER

button [1] or [2] at the same time to pans the

camera toward the left or right.

0

Pressing the left or right side of the [L / R

SET] + [1] (STD) at the same time pans the

camera toward the left or right accordingly.

0

Pressing the left or right side of the [L / R

SET] + [2] (REV) at the same time pans the

camera toward the right or left accordingly.

This setting comes in handy in cases such as

when the camera is suspended from the

ceiling.

I

FOCUS button

For adjusting the focus.

0

[AUTO]:

Auto Focus mode (AF)

0

[MANUAL]:

Manual Focus mode (MF)

0

During MF, focus is adjusted using [FAR]

(for setting focus on a distant subject) and

[NEAR] (for setting focus on a nearby

subject).

J

P/T RST button

Resets the pan and tilt positions.

K

BACKLIGHT button

Press the button to enable backlight

compensation. Pressing the button again

disables backlight compensation.

Memo : 

0

This feature is available only when [Exposure] is

configured to “Auto”.

0

Use this feature when there is a light source

behind the subject that causes the subject to

appear dark in the image.

L

MENU button

Displays the menu or exits the menu display.

M

PAN/TILT CONTROL button

Press the arrow button to pan or tilt the camera.

Pressing the [HOME] button restores the

orientation of the camera to face the front.

Moves the cursor when the menu is displayed.

N

RESET button

Erases the preconfigured settings.

[RESET] + NUMBER button (0 to 9):

Erases the preset position in the selected

NUMBER button.

[

Z

] + [#] + [RESET]:

Erases all the preset positions.

Memo : 

Press the buttons above in sequence.

18

Names of Parts

Getting Started