background image

2

Dear Customer,

Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety informa-
tion and precautions contained in the following pages to ensure safe use of your new VCR.

CAUTIONS

WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.

CAUTION:

This video cassette recorder should be used with DC 12V  only.
To prevent electric shocks and fire hazards, DO NOT use
any other power source.

Failure to heed the following precautions may result in
damage to the VCR, remote control or video cassette.

1. DO NOT place the VCR . . .

... in an environment prone to extreme temperatures or

humidity.

... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are

generated.

... on a surface that is unstable or subject to vibration.

2. DO NOT block the VCR’s ventilation openings.
3.  DO NOT place heavy objects on the VCR or remote

control.

4. DO NOT place anything which might spill on top of the

VCR or remote control.

5. AVOID violent shocks to the VCR during transport.

**MOISTURE CONDENSATION

Moisture in the air will condense on the VCR when you move
it from a cold place to a warm place, or under extremely
humid conditions—just as water droplets form on the sur-
face of a glass filled with cold liquid. Moisture condensation
on the head drum will cause damage to the tape. In condi-
tions where condensation may occur, keep the VCR’s power
turned on for a few hours to let the moisture dry before in-
serting a tape.

**ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads
may cause the playback picture to become blurred or inter-
rupted. Be sure to contact your nearest JVC dealer if such
troubles occur.

Cautions on operation

• When the car is parked under the blazing sun or in an

extremely cold place for a long time, wait a while to use
this unit after the temperature of the cabin drops to the
normal temperature.

• Use this unit as the engine is running. If this unit is used as

the engine is stopping, it depletes the car battery and, if
worst comes to worst, the battery fails in starting the en-
gine.

• If this unit is disconnected during operation (playback, fast-

forward, rewind, etc.), it may cause a  machine failure.
When disconnecting this unit, be sure to remove the video
cassette from the unit beforehand.

• When the engine key is turned off, this unit is also turned

off at the same time. To operate this unit again, turn it on
once more after starting the engine.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:      TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral 
triangle, is intended to alert the user to the presence of 
uninsulated "dangerous voltage" within the product's enclosure 
that may be of sufficient magnitude to constitute a risk of electric 
shock to persons.

The exclamation point within an equilateral triangle is intended to 
alert the user to the presence of important operating and 
maintenance (servicing) instructions in the literature 

accompanying the appliance.

This Class B digital apparatus meets all requirements of
the Canadian Interference–Causing Equipment Regulations.

“Cet appareil numérique de la classe B respecte toutes les
exigences du 

Règlement sur le matériel brouilleur du

Canada.”

5

Cassettes marked ''VHS'' (or ''S-VHS'') can be used with

this video cassette recorder. However, S-VHS recording
is not possible with this model.

5

This model is equipped with SQPB (S-VHS QUASI PLAY-

BACK) that makes it possible to play back S-VHS record-
ings with regular VHS resolution.

Summary of Contents for KZ-V10



















Reviews: