15
Installation and Connection
Please read the following carefully when installing this unit.
Minimum Space Required
Precautions for Installation
Installation Environment
This unit is a precision device. Do not install it at the following places. Doing so may cause fire or malfunction of
the unit.
●
Where there is water, humidity or dust
●
Where the unit may be subjected to oily or cigarette smoke
●
On a soft surface such as carpet or cushion
●
Where the unit may be subjected to high temperature due to direct sunlight
●
When temperature is high or low
Check that it is well ventilated before installing on a rack. When devices that emit heat, such as power amplifiers, are to
be installed on a rack, mount a fan on the rack as well.
Allowable operation temperature range: +5
I
to +35
I
Allowable relative humidity range: 20 % to 80 % (no condensation)
Allowable storage temperature range:
-
10
I
to +60
I
●
Do not place this unit in an enclosed area or block the
air vents. Allow sufficient space around this unit for
emission of heat.
●
The unit’s air vents are at the top and bottom.
●
Do not place objects on top of this unit when electricity
is flowing.
30 mm and above
100 mm and above
100 mm and above
100 mm and above
30 mm and above
ENGLISH
LD-HD1K.book Page 15 Tuesday, December 27, 2005 2:02 AM
