20
Adjustments and Settings Using Menus
The menus of this unit form a structure as shown below.
The menu is displayed on the LCD as well as the screen through the projector that is connected to this unit.
INPUT SELECT
INPUT ASP. RATIO
Frame AR
Active Input AR
Zoom
Pan
Borders
Preset
Save
INPUT ADJUST
Border Level
Overscan
Line Offset
HDMI Input Control
VCR Mode
Film Mode
Auto Priority
Audio Input
AV Lip Sync
PICTURE CONTROL
Brightness
Contrast
Saturation
Hue
Sharpness(Comp)
Y/C Delay
CUE-Correction
CONFIGURATION
Test Patterns
Auto Standby
HDCP Mode
Power LED
User Mode
Serial Port Rate
Factory Default
Software Update
Information
OUTPUT SETUP
Analog/Digital
Format
Aspect Ratio
Sync Type
Sync Polarity
Colorspace
Frame Rate
Color Depth
Display Profile
.................................................................................................
INPUT SELECT
Switches the input source. This has the same function as
the input selection buttons on the remote control unit. SDI
is not supported.
.................................................................................................
INPUT ASP. RATIO
Sets the aspect ratio and size of the input image.
Frame AR (Frame Aspect Ratio)
Set to
A
16:9
B
when the input image is compressed for
widescreen TVs.
Active Input AR (Active Input Aspect Ratio)
This is the preset aspect ratio of the video image or
program (movie). This aspect ratio is normally stated at
the back cover of the DVD. The upper and lower borders
(black bands) may appear wider or narrower, depending
on the set value. When the aspect ratio of
A
Frame AR
B
and
A
Active Input AR
B
are the same, this is known as a
full frame.
●
The relationship between Active Input AR and Frame AR is
as follows: 1.33:1=4:3, 1.55:1=14:9, 1.66:1=15:9,
1.78:1=16:9.
Zoom
Enables the displayed input image to be enlarged in the
horizontal (
Hor.
) or vertical (
Ver.
) direction.
Pan
Enables movement of the display area in the vertical
(
Ver.
) or horizontal (
Hor.
) direction upon zooming.
Menu List
Menu Configuration
Setting Values:
Video 1, Video 2, S-Video 1, S-Video 2,
Component 1, Component 2, RGBHV, HDMI 1,
HDMI 2, HDMI 3, HDMI 4, Auto, SDI
Default Value: Auto
Setting Values: 4:3, 16:9
Default Value: 16:9
Setting Values: 1.33:1, 1.55:1, 1.66:1, 1.78:1, 1.85:1,
2.35:1, User (1.01:1
-
3.00:1)
Default Value: 1.33:1
Setting Values: Hor. (0
-
100), Ver. (0
-
100)
Default Value: Hor. (0), Ver. (0)
Setting Values: Hor. (0
-
100), Ver. (0
-
100)
Default Value: Hor. (0), Ver. (0)
LD-HD1K.book Page 20 Tuesday, December 27, 2005 2:02 AM
