Downloaded from www.vandenborre.be
19
Other convenience functions
Selected Items
Setup hint
Picture
Picture Mode
Standard
Standard picture quality (factory-set)
Vivid
Enhanced picture contrast and sharpness (factory-set)
Soft
Intended for bad-quality signals (factory-set)
User
Your personal preferences
Brightness / Contrast / Sharpness / Colour / Tint
(available only when you selected “User” at
Picture Mode)
You can adjust the picture to your preference.
Tint is available in NTSC-signal mode or Component/
HDMI-signal with 60Hz.
•
Backlight
(available only when you selected “User” at
Picture Mode)
You can use the Backlight feature to adjust the screen
brightness for improved picture clarity.
Colour Temperature
Neutral (Standard) / Reddish (Warm) / Bluish (Cool)
Noise Reduction
Sometimes it is not possible to input a high-quality HD
signal. The actual signal input is too small and noisy,
e.g. a video film in letterbox format, or a noisy analogue
cable TV signal. This feature can slightly reduce
interferences caused by the faulty input signal.
Off / Low / Middle / High
Reset
Select “Reset” to reset Picture options to the factory
preset values.
Sound
Sound Mode
You can change the sound mode setting. If you select
“User”, you can change the setting of Bass and Treble
and TV memorizes your setting.
Standard / Movie / Music / Speech
/ User
Bass / Treble / Balance
You can adjust the sound quality to your preference.
Surround
The Surround feature processes the audio signal to
expand the listening field wider and deeper to create a
‘pseudo surround-sound’ from the TV’s speakers.
The feature works with stereo signals from TV broadcast
or AV input.
On / Off
Stable Sound
This will automatically adjust volume so each channel
and input has the same average volume level.
On / Off
Reset
Select “Reset” to reset Sound Mode, Bass, Treble and
Balance to the factory preset values.
Channel
See page 12-13.
57W0151A.indb 19
57W0151A.indb 19
9/15/11 4:43:13 PM
9/15/11 4:43:13 PM
