background image

2

3

4

5

6

7

9

p

1

8

6

4

  VOLUME –/+ (  /  ) buttons*

2

Adjusts the volume.

5

  MENU button

Displays the MAIN MENU.
•  To display the SET UP MENU, press   

button while pressing MENU button.

•  For the menu operations, see page 7.

6

  SCAN SIZE button/lamp

Selects the screen size when VIDEO 1 or 
VIDEO 2 is selected for the input.
•  Each time you press the button, the screen 

size changes as follows:

•  When “NARROW” is selected, the lamp 

lights.

•  When “NARROW” is selected, black bars 

appear on the top and the bottom of the 
screen because the aspect ratio of the LCD 
panel is 5:4.

•  This setting is not available for signals from 

a computer is selected for the input.

Daily Operations / Connections 

7

 Front panel

•  “NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp lights even when the 

function does not actually work).

•  The items controlled by the MAKE system cannot be controlled by the buttons on the front panel (“REMOTE ON” is displayed and the lamps 

do not light).

1

  Speaker (monaural)

The speaker emits the audio signal for the 
selected input.

2

  CHROMA/PHASE ( ) button*

1

Displays the adjustment bar for the picture 
color density or hue.
•  Each time you press the button, the 

adjustment for chroma and phase changes.

•  To adjust, press   or   (

4

) button.

•  The adjustment is memorized for each 

Picture Mode (

7

).

3

  CONTRAST/BRIGHT ( ) button*

1

Displays the adjustment bar for the picture 
contrast or brightness.
•  Each time you press the button, the 

adjustment for contrast and brightness 
changes.

•  To adjust, press   or   (

4

) button.

•  The adjustment is memorized for each 

Picture Mode (

7

).

7

  PICTURE MODE button/lamp

Selects the Picture Mode.*

3

STD.:

 Normal picture

DARK ENHANCED:

 Makes the dark parts of 

the picture clear.

VIVID:

 Makes the picture vivid.

DYNAMIC:

 Makes the picture bright.

•  When “DARK ENHANCED, “VIVID,” or 

“DYNAMIC” is selected, the lamp lights.

•  When RGB or DVI is selected for the input, 

the Picture Mode is fixed to “STD.”

•  When “DYNAMIC” is selected, high 

luminance parts of pictures may not be 
displayed properly. In this case, select 
another Picture Mode.

8

  INPUT SELECT buttons/lamps

Selects an input.

VIDEO 1:

 VIDEO 1 IN or Y/C terminal

VIDEO 2:

 VIDEO 2 IN terminal

RGB:

 RGB terminal*

4

DVI:

 DVI-D terminal

•  The lamp for the selected input lights.

9

  Power lamp

Unlit:

 The monitor is completely off (the AC 

plug is not connected).

Lights in Green:

 The monitor is on or in the 

Gray Back mode (

 “NO SYNC ACTION” in 

“SYNC FUNCTION” on page 12).

Lights in orange:

 The monitor is off (on 

standby).

Flashes in orange:

 The monitor is in the 

Power Save mode (

 “NO SYNC ACTION” in 

“SYNC FUNCTION” on page 12).

p

 

 button

Turns on and off (on standby) the monitor.

*

1

 When a menu screen or adjustment bar is displayed, 

these buttons work as   /   to select an item.

*

2

 When a menu screen or adjustment bar is displayed, 

these buttons work as   /   to adjust the item or 
select an option.

*

3

 To reset the adjustments for each Picture Mode, see 

“Resetting the Picture Mode” (

 page 7).

*

4

 Before using this input, perform “AUTO ADJUST” (

 

“AUTO ADJUST” on page 10).

The illustration of the monitor is of LM-H191.

LMH191&171EA_EN.indd   6

LMH191&171EA_EN.indd   6

08.7.8   5:40:19 PM

08.7.8   5:40:19 PM

Summary of Contents for LM-H171



















Reviews: