English
2
Thank you for purchasing a JVC product.
Before you begin using it, please read the instructions carefully.
Warnings, Cautions and Others
Warning
Observe the following carefully before installation;
otherwise, the speaker may fall over, causing damage or
injury.
– Do not install the speaker stand on an uneven surface
or in a place subject to vibration.
– Do not lean against the speaker stand. Especially pay
attention to children not to do so.
– Fasten all the screws firmly when assembling the
speaker stand, and check its tightness afterwards
regularly.
– Do not install any overweight equipment (over 10
kg
)
on the speaker stand.
7
Precautions
• For safety use
– Do not climb or hang on to the speaker stand.
– Attach the speaker firmly to the speaker stand.
• For installation
– While installing the speaker on the stand, do not drop it from
the stand. Pay attention not to damage the speaker cabinet.
– To obtain the best bass sound quality, install the speaker
stand on the flat floor.
• For daily use
– Wipe with a dry, soft cloth if the speaker stand should
become dirty. If very dirty, wipe with a cloth applied a small
amount of water or neutral detergent, then wipe with a dry
cloth.
– Do not use chemicals such as benzine and thinner for
cleaning the speaker stand; otherwise, the speaker stand
may deteriorate or its paint may come off.
7
Checking the supplied parts
Check to be sure you have the following supplied parts.
The quantity of piece supplied is for one pair of speaker stands.
If any item is missing, contact your dealer immediately.
Screws
------------------- 6
Top plate --------------------- 2
Bottom plate --------------- 2
Screws
------------------- 6
(Black: M6 x 30 mm)
(Black: M6 x 16 mm)
Screws
------------------- 4
Leg
------------------------ 4
Leg holder ------------------ 6
(thick)
(thin)
(Silver: M5 x 28 mm)
Leg
------------------------ 2
EN_LS-M1[US]4.p65
04.11.4, 4:57 PM
2
