34
Connection to other equipment
2. Connect video recorder (e.g. to record from DVB-T)
VCR
TV
(All illustrated SCART cables and
antenna cables are not supplied)
TV
Satellite antenna
Satellite
receiver
Video recorder
1. Connecting to other equipment
Attention: Preparation:
• Disconnect all equipment from the AC-supply, to prevent any possible damage.
• Make the necessary connections.
• Make sure all connections are safe & secure before reconnecting your equipment the AC-supply.
Please connect your satellite-receiver or DVD player via SCART (AV1). Make sure your SCART cable’s cross-
section is at least 1 cm or more. SCART cables with less thickness may cause visible noise.
Please make the following settings inside your receiver’s / DVD-player’s setup-menu:
Video signal: RGB
TV-Format: 16:9
If you miss to make these settings properly, picture quality will be inferior and parts of the picture
might be missing. This is not a fault of this TV-set.
In case you need help to make this adjustment with your satellite-receiver / DVD-player, please consult
the related instructions or contact the supplier or maker of those apparatus for support.
Please use the satellite’s remote-control handset to select Teletext or desired TV-station. Generally it is
not possible to store satellite TV-stations into a standard TV.
If the TV does not automatically switch to AV-1, please select INPUT AV1 manually, as seen on page
12.
Video recorder
to AV1
(All illustrated SCART cables are not supplied)
TV (Rear view)
(A)
(B)
TV (Back view)
TV (Side view)
Stereo amplifier
Audio input
(Coaxial digital lead, not supplied)
Surround sound amplifier system
DIGITAL AUDIO
COAXIAL OUT
(SCART-RCA cable, not supplied)
3. Connecting an audio system
You can supply the TV sound to the stereo equipment (A) with the SCART socket. Use a special SCART
cable for the connection which sold at the accessory shop. (please consult your hi-fi instructions for
details). If you have a surround sound amplifier/decoder (B) with a coaxial digital input, you can connect
the Coaxial Digital Audio Output to it, using a suitable coaxial digital lead.
Note:
You can hear only the sound
received with a built-in tuner in
the connection of (A), but you
can not hear the sound input to
an external input terminal.
The Balance/Bass/Treble
adjustments (see P.19) only
function with the sound from the
TV speakers - it does not affect
the audio output sockets.
•
•
Note:
Programme the video recorder timer to
the desired time. The TV appliance cannot
switch the video recorder on or off.
In external input mode, Analogue TV-signal
will be output from SCART socket.
When the scrambled DTV channel is
received, it is not output from SCART even
if the scramble has been released by the
CI card.
•
•
•
55L0501A_ENG.indd 34
55L0501A_ENG.indd 34
11/25/10 11:32:33 AM
11/25/10 11:32:33 AM
