21
Other convenience functions
Selected Items
Setup hint
Setup
OSD Timer
The OSD is cleared automatically as per this setting.
But if you select “Never”, the OSD is not cleared
automatically .(Press
RETURN
to clear.)
5/10/15/20/25/30 Seconds/Never
SCART Input
Auto
Factory setting, normally OK.
RGB
when RGB is input.
CVBS
when Composite is input.
S-Video
When S-Video is input.
SCART Output
This determines whether the SCART outputs the signal
from the internal tuner or whatever input is shown on the
screen.
TV / Monitor
PC Setup
Auto Adjust
H Position, V Position, Phase and Clock are adjusted
automatically as per the input PC video signal.
When PC-input mode was selected and a PC-
signal was input, Auto Adjust will be performed
automatically.
•
H Position
To adjust the horizontal placing of the image.
V Position
To adjust the vertical placing of the image.
Phase
Eliminates the horizontal (PHASE) interfering lines.
Clock
Eliminates the vertical (CLOCK) interfering lines.
HDMI Mode
Auto
Auto (factory setting), can remain in this mode. Change
not necessary.
PC
PC (for PC), if desired.
Video
Video (for Video), if desired.
Blue Screen
You can set the TV to automatically change to a blue
screen and mute the sound if the signal is weak or
absent.
This option is not available for DTV, PC and Radio
mode.
•
On / Off
Reset TV Setting
Press to enter the Reset TV Setting screen.
Press to select “OK”, then press
ENTER
. Reset the TV
function will now begin, and this unit will automatically
turn off.
Software Upgrade
This option is not available because of service purpose
only.
Version
If you press , the
μ
-com’s software version is displayed.
57W0201A_ENG.indd 21
57W0201A_ENG.indd 21
9/15/11 2:07:03 PM
9/15/11 2:07:03 PM
