English-2
Power
Plug the power cord into the correct power outlet. An unstable connection may cause fire.
Do not use damaged power cords or plugs, or use a loose wall outlet. This may cause electrical shock
or fire.
Do never touch the power cord with wet hands. This may cause electrical shock.
Do not use multiple devices with one outlet. Overheating the outlet may cause fire.
Do not bend or pull out the power cord using force, nor place heavy objects over it. This may cause
electrical shock or fire.
Make sure you pull out the power cord holding the plug itself. An internal disconnection may cause fire.
When removing the product, turn off the power and pull out the plug from the power outlet. Also make
sure other devices including the antenna or the connectors are removed from the outlets before
relocating the product. Otherwise you may suffer electrical shock or fire due to a damaged power cord.
The mains plug shall remain readily operable.
Plug as disconnection device shall remain to be readily approached by user.
Make enough room for inserting and removing the power plug. Place the TV as close to the outlet as
possible. The Main power supply for this TV is controlled by inserting or removing the power plug.
The main power switch on the back of the TV does not fully isolate the TV from the main power
supply.
If you do not use this TV for a long period of time, be sure to disconnect the power plug from the AC
outlet.
Installation
Keep the product away from any heating devices. Placing it close to a heating device may cause fire.
Keep the power cord away from any heating devices. A melted coating may cause fire or electrical
shock.
Place the antenna as far away as possible from any high-voltage cables.
Touching the high voltage wiring may cause fire or electrical shock.
Do not install the product in oily, smoky or humid (or exposed to rain/water) places or automobiles.
This may cause fire.
The connection between the external antenna and the internal wiring should be turned inside to avoid
any inflow of rain. Exposing the LCD to water (rain) will cause electrical shock or fire.
Do not use the product in humid places. Humidity will shorten the life of the product and may cause an
electrical shortage or fire.
Do not use the product in places with low temperatures (below 5°C).
Avoid installing the product in poorly ventilated places. Internal overheating may cause an electrical
shortage and fire.
Be sure not to cover the ventilator (with a table-cloth or curtain, etc.). Internal overheating may cause
an electrical shortage and fire.
Do not install the product in an unstable place or on a small stand. The product may cause serious
injury, if it falls on somebody (especially children). Install it on an even, stable place as it is front-heavy.
Do not install the product on the floor. Someone (especially children) may trip over it.
General Safety Precautions
General Safety Precautions
