8
Please read P. 9 - 17 of this manual to set up your TV.
z
Stand and screws are also included. For details, refer to page 7.
(LT-32DR9BJ only)
Power requirements
z
Connect the power cord only to a 220 - 240 V, 50 Hz AC outlet.
When attaching the TV to the wall, use the optional JVC wall mounting unit
z
Consult a qualified technician.
z
See the included manual on mounting procedures.
z
JVC assumes no responsibility for damage due to improper mounting.
z
Mounting holes for wall mounting unit:
LT-32DR9BJ:
M5 x 4, 200 mm x 200 mm
Depth of screw hole is 7 mm from the surface of the TV.
LT-42DR9BJ:
M5 x 4, 400 mm x 200 mm
Depth of screw hole is 13 mm from the surface of the TV.
Installation requirements
z
Place the TV on a flat and stable
location.
z
To avoid overheating, ensure the
unit has ample room.
z
To prevent the TV from falling, thread
the belt through the hole on the back of
the stand and secure it to the TV rack,
etc.
Use two “AAA/R03” dry cell batteries. Insert the batteries from the
-
end,
making sure the
+
and
-
polarities are correct.
Check accessories
Install your TV
INSTRUCTIONS
WIDE LCD PANEL TV
LT-32DR9BJ
LT-42DR9BJ
Trade Mark of the DVB Digital Video Broadcasting
Project (1991 to 1996) Number : 5227, 5808
User Manual
“INSTRUCTIONS”
(this book)
“AAA/R03” Batteries
(For confirming the TV
works)
Separate Manual
“WATCHING DIGITAL
CHANNELS”
Remote control
RM-C1931
Cleaning cloth
(For details on using the
cleaning cloth, see P. 7.)
USE
TROUBLE?
SETTING
WATCHING DIGITAL CHANNELS
Before reading this manual
Read the separate user manual (INSTRUCTIONS), “Warning”
(P. 2), and understand how to use th e TV safely. After that follow the
instructions in “Getting started” (P. 8) to connect the aerial and other
external devices to the TV, and configure the settings for the TV.
Digital terrestrial broadcasting (DVB-T)
g
Digital channels
Analogue terrestrial broadcasting (VHF / UHF) and
analogue cable TV
g
Analogue channels
This TV can receive digital terrestrial broadcasting (DVB-T)
in the United Kingdom. Digital terrestrial broadcasting
(DVB-T) reception in other countries is not guaranteed.
The on-screen displays (including DTV menus) are in
English. No other languages are available.
Contents
This manual only provides information on
watching digital channels. Other information is
explained in the “INSTRUCTIONS”. Please read
both this manual and the “INSTRUCTIONS”
manual.
Note
Watching digital channels...........................................................2
Display the programme information .................................................... 4
View subtitles ...................................................................................... 4
Select audio language ........................................................................ 5
View teletext information ..................................................................... 5
Using EPG (Electronic Programme Guide) ................................6
Customising your TV ..................................................................8
Edit PR (Edit PR List).......................................................................... 9
Timer ................................................................................................. 10
Configuration..................................................................................... 12
Setup................................................................................................. 13
Installation ......................................................................................... 14
Troubleshooting........................................................................16
Technical information ...............................................................17
200 mm
150 mm 50 mm
150 mm
50 mm
Insert the batteries
Watch pay-TV digital channels
Subscribe to a broadcasting company
beforehand. A Viewing Card (B) will be sent by
the broadcasting company after subscribing to it.
It may be necessary for you to purchase a CAM
(Conditional Access Module) (A) in addition to the
Viewing Card.
Consult your broadcasting company or retailer.
A
Unplug the power cord
B
Insert “B” into “A”.
C
Insert “A”.
D
Plug the power cord, and turn the power on.
E
Perform necessary settings using “Common Interface”.
g
z
Pay-TV analogue channels cannot be watched.
Hole
Belt and screw (not provided)
WARNING:
Batteries shall not be exposed to
excessive heat such as direct
sunshine, fire or the like.
A
B
WATCHING DIGITAL CHANNELS
“Common Interface” (P. 13)
Getting started
LT-42DR9BJ_003A.book Page 8 Thursday, September 11, 2008 3:03 PM
