12
Power supply for the indoor aerial
When using an indoor aerial which requires external power, set “Antenna
Power” to “On” in step
of “Initial settings” (P. 13). The TV will supply DC 5V,
50mA (max) from the aerial socket through the cable to the aerial.
z
Supplying power to outdoor and indoor aerials which does not require
external power, may cause damage to the aerial. If you are uncertain
whether the aerial needs external power, select “Off”.
z
Connect the aerial directly to the TV. When a recording device is
connected between the aerial and the TV, power cannot be supplied to the
aerial.
z
Power is supplied to the aerial only when the TV is on.
z
You can change the “Antenna Power” setting later.
For details, refer to “Antenna Power” (P. 13) on the separate manual
“WATCHING DIGITAL CHANNELS”.
Connecting the aerial
AERIAL
z
After all the connections
have been made, insert the
plug into an AC outlet.
Connect the aerial
AERIAL
Connect a VCR / DVD recorder
z
After all the
connections have
been made, insert
the plug into an AC
outlet.
VCR / DVD recorder
EXT-2
EXT-1
LT-42DR9BJ_003A.book Page 12 Thursday, September 11, 2008 3:03 PM
