English
- 14 -
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources.
• Press “
AV
” button on your remote control for directly
changing sources.
or,
• Select “
Source
” option from the main menu
by using “ ” or “ ” button. Use then “
” or
“
” button to highlight an input and press “ ” button
to select.
Note: You can mark desired source options by pressing the
OK button. Therefore, when
“
AV
”
button is pressed, only
the marked source options will be available (except for the
TV source).
Basic Operations
You can operate your TV using both the
remote control and onset buttons.
Operation with the Buttons of the TV
Volume Setting
• Press “
” button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
• Press “
” button to select the next programme or
“
” button to select the previous programme.
Viewing Main Menu
• Press “
” / “
” buttons at the same time to
view main menu. In the Main menu select sub-menu
using “
” or “
” buttons and enter the sub-menu
using the
TV/AV
button, the “
” / “
” buttons
are used to select sub menu’s displayed across the
top of the menu box.
The “
” or “
” buttons are used to select items in
the current menu list and the “
” / “
” are
used to alter the settings.
Press
MENU
on the remote or “
” / “
”
together to exit the menu system.
AV Mode
• Press the “
TV/AV
” button in the control panel on the
TV to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press “
” button to increase the volume. Press
“
” button to decrease the volume. A volume
level scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press “
” button to select the previous programme.
• Press “
” button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between 10 - 1000 (for IDTV) or 10-199 (for
analogue), press the numeric buttons consecutively.
Press directly the programme number to reselect
single digit programmes.
Initial Settings
When the TV is turned on for the fi rst time, it is in the
digital mode. Because this is the fi rst time the TV is
used, there are no channels stored in the memory and
the following message appears on the screen.
• To select the “Yes” or “No” option, highlight the item
by using “ ” or “ ” buttons and press
OK
button.
The IDTV will automatically tune to the transmission
channels, searching for digital terrestrial TV broadcasts
and displaying the names of channels found. This
process will take a few minutes. To cancel searching,
you can press
MENU
button at any time during the
process. The following OSD will be displayed during
the automatic search:
