English
- 26 -
Program Table
Select
Program Table
by pressing “ ” or “ ”
button.
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except for the
AV modes). By cursor action, programme selection is
done automatically.
Name
To change the name of a programme, select the
programme and press the
RED
button.
The fi rst letter of the selected name will be highlighted.
Press “
” or “
” button to change that letter and “ ”
or “ ” button to select the other letters. By pressing
the
RED
button, you can store the name.
Move
Select the programme which you want to insert by
navigation buttons. Press the
GREEN
button. By
navigation buttons move the selected programme to
the decided programme space and press the
GREEN
button again.
Delete
To delete a programme, press the
YELLOW
button.
Pressing the
YELLOW
button again erases the
selected programme from the programme list, and
the following programmes shift one line up.
APS (Auto Programming System)
When you press the
BLUE
button for starting
automatic tuning,
Auto Programming System
menu
will appear on the screen:
Press “ ” or “ ” button to select your country. If
you want to exit from A.P.S. function, press the
BLUE
button. When you press
OK
or
RED
button
for starting automatic tuning, all stored programmes
will be erased and the TV will search for available
channels. During the search, the following OSD will
be displayed:
Whenever you press the
BLUE
button, APS function
stops and Program Table appears on the screen.
If you wait until the end of APS, Program Table will be
displayed with the programmes found and located.
Source Menu
Press “ ” or “ ” button and select the source icon.
Then press “
” or
OK
button. Source menu appears
on the screen:
