59
60
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
We may change the design and specifications without notice.
Specifications
Main unit
Terminals / Connectors
Terminal name
Terminal type
Signal type (IN)
Signal type (OUT) Notes
Input / Output
terminals
EXT-1
Euroconnector x 1
(SCART connector)
Composite video, S-video,
Analogue RGB, AUDIO L / R
TV out
EXT-2
Euroconnector x 1
(SCART connector)
Composite video, S-video,
Analogue RGB, AUDIO L / R
Dubbing out
(S-VIDEO out is
available only for
digital channels)
“T-V LINK”
compatible
Input terminals
EXT-3
RCA connectors x 3,
S-VIDEO connector x 1
Composite video, S-video
AUDIO L / R
EXT-4
RCA connectors x 5
Analogue component
(576i (625i) / 480i (525i),
Progressive : 576p (625p) / 480p (525p),
HD : 1080i (1125i), 720p (750p))
AUDIO L / R
EXT-5 (HDMI-1)
HDMI connector x 1
HDMI
(576i (625i) / 480i (525i) /
576p (625p) / 480p (525p),
1080i (1125i), 720p (750p))
EXT-6 (HDMI-2)
PC INPUT
D-SUB (15 pins) x 1 Analogue PC signal (P. 56)
Output
terminals
AUDIO OUT
RCA connectors x 2
Audio L / R
DIGITAL
AUDIO OUT
OPTICAL connector x1
Digital audio
(48 kHz,16 bit
linear PCM /
Dolby Digital)
Headphone
Stereo mini-jack x 1
(3.5 mm in diameter)
Headphone
output
A CAM (Conditional Access Module) for watching pay-TV digital channels can be installed (P. 8)
DC power can be supplied to the indoor aerial (P. 57)
Model
LT-37DM7BJ
Broadcasting systems
CCIR I
Colour systems
TV broadcast : PAL
External input : PAL, NTSC 3.58/4.43 MHz
Channels and frequencies
Digital : E21-E68 (Frequency : 474 MHz-850 MHz)
Analogue :
UNITED KINGDOM : E21-E69 (UHF)
IRELAND : IR A-IR J, E2-E12, E21-E69 (VHF/UHF)
Sound-multiplex systems
NICAM (I)
Teletext systems
Digital : MHEG 5 UK profile
Analogue : FLOF (Fastext), WST (World Standard System).
Power requirements
AC 220 V - 240 V, 50 Hz
Audio output (Rated power output) 10 W + 10 W
Speakers
(4 cm x 16 cm) oval x 2
Power consumption
[standby]
169 W
[0.6 W]
Screen size
(visible area size measured diagonally) 94 cm
Dimensions (W x H x D: mm)
[without stand]
919 x 651.9 x 311.9
[919 x 603.7 x 121.3]
Weights
[without stand]
21.9 kg
[19.1 kg]
Accessories
(See “Check accessories”, P. 6)
Technical information
(continued)
erience /----
Most conventional LCD panel uses 50 frames per second (50 Hz) to display an image which needs long holding
time (time it takes to display single frame), causing blurring or ghost images when there is rapid or complex
movement across the screen - a phenomenon common to all LCD panels.
This TV is equipped with JVC’s original “100Hz Clear Motion Drive” technology, which displays two frames (the
original plus the new interpolated frame) in the time a 50 Hz set displays a single frame. Resulting to double the
typical rate, 100 frames per second (100 Hz) and halve the holding time without reducing brightness or contrast.
By using this technology you will be able to reduce blurring or ghost images when there is rapid or complex
movement across the screen.
By using “Demo”, you can display the differences between conventional LCD (50 Hz) and LCD panel equipped
with “100Hz Clear Motion Drive”.
100Hz Clear Motion Drive
*1 To simulate Moving image of conventional LCD, the TV will display two same frames at a time.
* The illustrations are emphasized to make clear differences between LCD panel equipped with “100Hz Clear Motion
Drive” and conventional LCD.
Set “Demo” to “On” “Off”.
“Demo” (P. 36)
When set to “On”, it automatically enters demonstration every time no operation is made for approximately 3
minutes. To stop automatic demonstration, set “Demo” to “Off” .
When the images are 60 frames per second (60 Hz), it will be produced as 120 frames per second (120 Hz)
Moving image of LCD panel equipped with “100Hz
Clear Motion Drive” (100 frames per second)
The “DynaPix” ticker will run
right to left
You can confirm the differences
of the two LCD’s with actual
moving images
Moving image of 50 Hz conventional
LCD (50 frames per second)
*1
59-60
10/30/2006 10:22:43 AM
