17
Configuring your remote control
You can configure your TV’s remote control to operate your other
devices.
Configure your remote control.
z
If your device does not respond, try all the available codes for
the device’s brand.
z
If none of the code works, or the brand is not listed, refer to
“Using the search code function” (P. 18).
1
Turn on the device manually.
2
Switch the remote control mode to a mode that
matches your device. Refer to the table on the
right to select an appropriate mode.
z
The indicator lights for 3 seconds each time the remote
control is operated.
3
Find the remote control code for your device
according to its brand from the “Remote control
codes” manual.
4
Set the remote control code.
5
Point the remote control at your device, press
and confirm that your device is turned off. If your
device does not respond, try entering another
available code.
TV
STB
AUDIO
DVD
Press and hold
Enter four digit
number
Release the button
MODE
Applicable devices
TV
This TV only
STB
Cable Set Top Box, Cable/PVR Combination,
Satellite Set Top Box, SAT/PVR Combination
DVD
DVD, Blu-Ray DVD, HD DVD, DVD-R, Home
Theater in Box, TV/DVD Combination
AUDIO
Amplifier, Receiver, Home Theater in Box
Note
LCD
LT-46SZ58_EN.book Page 17 Wednesday, August 20, 2008 9:34 AM