17
3
Initial Setup
Connecting an Analogue Device
If you have connected an analogue device such as a video recorder via the
aerial socket on your TV you will have to tune it in using Analogue mode. Ensure
the device is switched on before you start the tuning process.
1. Press the MENU button, press the buttons to select INSTALL AND
RETUNE and press OK.
2. Select AUTOMATIC CHANNEL SCAN (RETUNE) and press OK.
3. Press the buttons to select ANALOGUE and press OK.
4. Press the buttons to select YES then press OK. The search will
automatically start, this will not delete your Digital channels, so don't worry!
5. When the search has finished the EDIT CHANNEL LIST will appear. Your
analogue channel will be at the end of the channel list.
• If a locked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the
channel will then be unlocked (refer to Locking Channel for details).
• Press the
button to return to the previously viewed channel.
Display Channel Information
• Press the i button to view the current information.
Volume Adjustment
• Press the V + or – button on the remote control or the V + or – buttons on
the back of the TV.
• If you wish to switch the sound off, press the button. You can turn the
volume down while your TV is in mute mode. Press the VOL – button, you
will see the volume level reduce, but you won't hear anything at the moment.
To listen to your TV at the new lower level, press the button again or VOL
+ button.
Using the buttons on the back of the TV
The button on the back of the TV is like a joystick you can push the centre and
move it reft, right, up and down.
• Press and hold the
button the switch the TV in and out of STANDBY.
• Press the
button to access the SOURCE menu, press the
/
buttons
to move up and down the menu. Press
to select a source.
• Press the
/
buttons to change channel.
• Press the +/- buttons to adjust the volume.
Channel Selection
• Press the P + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
Alternative
Press the OK button to enter the Channel List. Then use the
buttons to highlight and select the channel.
Press the OK button to view the selected channel.
OR
Press the i (info) button then the
buttons to search for a channel you wish to watch then press OK.
COMMON INTERF
A
CE
5V
dc
M
ax. 500mA
5V
dc
M
ax. 500mA
SubW.OUT
AUDIO IN
SC
AR
T
LAN
USB
5V DC max 500mA
Pr
Pb
Y / Video
R
L
VGA
ANT.
HDMI 3
ARC
HDMI 4
HDMI 2
HDMI 1
USB
Optic.OUT
USB 3.0
JVC 49' LED Smart 4K HDR TV LT-49C888 Manual.indd 17
22/02/2018 09:41