background image

Menu system instruction

Options

1. Press

  

 

 

key to display the main menu on the screen.

2. Press 

p

/

q

 key to select "Option" option. 

3. Press 

u

 key to enter “Option" submenu.

1. Press 

p

/

q

 key to select “

" option. 

2. Press 

OK

 

or 

u

 key to select a proper language for OSD

   

OSD Time

    Set the preferred amount of time 
    for the OSD to be displayed on the screen.

1. Press 

p

/

q

 key to select “Closed Caption" option. 

2. Press

p

/

q

 key to select CC mode.

Reset

1.Press “

p

/

q

" key to select "Reset" option.

2.Press “

u

" or "OK" key to confirm.

3.Press "Yes" to confirm again, TV will turn off automaticly and change all setting to factory 
   setting.

Network Configuration

Please refer to "Network setting"behind.

Software Update(USB)

When the TV need to be updated, please copy the new software to a USB storage and 
inset the USB storage to TV, then operating by following steps.
1.Press “

p

/

q

" key to select "Software Update" option.

2.Press “

u

” or "OK" key to confirm.

3.Press "Yes" to confirm again, the TV will update by USB, Please wait a few minutes 
and don't turn off the power, it will turn off automaticly when updating is finish.

Internet Update Check

This can update TV through internet.

Network Update Information

Display the 

.

User Mode

1.Press “

p

/

q

" key to select "User Mode" option.

2.Press “

u

” or "OK" key to confirm.

OSD Language

OSD Language

Closed Caption

 

Network Update Information

OSD Language

OSD Time 

Closed Caption

Reset

Network Configuration

Software Update(USB) 

Internet Update Check

Network Update Information

User Mode

-25-

Summary of Contents for LT-55MA888













































Reviews: