20
Operation
Sleep Timer Setting
Press
SLEEP/DIMMER
one or more times to select
delay time between 10 and 180 minutes, after the
player will turn off.
To check the remaining time, press
SLEEP/DIMMER
To cancel the sleep function, press
SLEEP/DIMMER
repeatedly until “SLEEP 10” appears, and then press
SLEEP/DIMMER
once again while “SLEEP 10” is
displayed.
Note:
You can check the remaining time before the DVD/CD
Receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
Dimmer
Press
SLEEP/DIMMER
once. The LED (Light-emitting
diode) of front panel is turned off and the display
window will be darken by half. To cancel it, press
SLEEP/DIMMER
repeatedly until dim off.
Muting
Press MUTING to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, the “MUTING” indicator flickers
in the display window.
Note:
This muting doesn’t affect the audio output to HDMI; it
only mutes the output of speakers connected to the
unit.
Setting the disc ejection lock
You can lock the disc tray to prevent the disc form
being ejected.
When the main unit is turned off, hold down the STOP
key at the front panel for 5 seconds
If you attempt to open the disc tray by pressing
OPEN/CLOSE key, the disc tray does not open and
“LOCKED” appears in the display window.
To cancel the disc ejection lock, hold down the STOP
key at the front panel for 5 seconds again when the
main unit is turned off.
“UNLOCKED” is displayed in the display window.
Note:
Before the main unit is turned off, DVD/CD function
should be selected.
Enjoying audio form an external
source
You can enjoy audio form an external source through
your unit.
Press INPUT repeatedly to select the desired input
source. - AUX, AUX OPT, AUDIO IN
Setting the surround mode
This system has a number of pre-set surround sound
fields. You can select a desired sound mode by using
SOURROUND
. You can change the
SOURROUND
using
b
/
B
arrow key while the
SOURROUND
information is displayed on.
The displayed items for the Equalizer may be different
depending on sound sources and effects.
[[PLII MOVIE/ PLII MUSIC/ PLII MTRX(matrix)] Dolby Pro Logic
II enables you to play stereo source on 5.1-channel.
[
Bypass
] You can enjoy the sound without equalizer effect.
Notes:
• In some of surround modes, some speakers maybe
no sound or low sound, it depends on the mode of
surround and the source of audio, it is not defective.
• You may need resetting the surround mode, after
switch the input, sometimes even after the sound
track changed.
