Filename [SR-MV40U_10Editing.fm]
Masterpage:Left+
60
EN
Page 60
March 13, 2006 11:41 am
EDITING
Dubbing An Entire Disc
Because this unit includes both DVD deck and VCR deck, you can
easily use this unit for dubbing without connecting any other
equipment.
1
For DVD deck
Load a disc you want to dub.
For VCR deck
Load a cassette with the record safety tab intact.
2
Press
VCR/DVD
repeatedly so that the VCR lamp lights up on
the unit.
3
Press
REC MODE
repeatedly to set the recording mode.
4
Press
VCR
}
DVD
to select the dubbing direction.
5
Press and hold
DUBB.
for more than 2 seconds to start the
dubbing. The dubbing (DUBB.) lamp lights up on the unit.
●
If the tape has not been rewound, the VCR deck rewinds the tape
automatically. When the VCR deck has finished rewinding, dubbing
begins automatically.
●
After dubbing is completed, the VCR deck rewinds the tape
automatically.
●
To stop dubbing, press
8
.
NOTES:
●
It is not possible to start dubbing if the unit retains a memory of the
resume points. Press
8
twice to clear the resume points.
●
There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
●
The superimposed indication during the operation or dubbing is not
recorded.
●
When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
●
It may be impossible to dub a DVD-R or DVD-RW (Video mode) disc
recorded on the devices from other manufacturers or on a PC. In
such case, perform “Manual Dubbing (From DVD To VCR)”
(
●
It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
Disc Dubbing (From DVD To VCR)
●
Turn on the unit.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the
TV/CABLE/DBS/DVD
switch to
DVD
.
1
4
7
2
5
8
0
3
6
9
REC MODE
8
VCR/DVD
8
VCR
}
DVD
DUBB.
VCR/DVD
DUBB. Lamp
SR-MV40US.book Page 60 Monday, March 13, 2006 11:41 AM
