background image

– 17 –

Recording

Recording a Tape on Deck B

1

Press EJECT 

0

 for the deck B.

2

Put in a recordable cassette, with the exposed
part of the tape down.

3

Close the cassette holder gently.

4

Check the tape direction of deck B.

• If the tape direction is not correct, press TAPE 

2

 

3

twice then 

7

 to change the tape direction.

5

Start playing the source — FM, AM*, CD
player, deck A, or auxiliary equipment
connected to AUX jacks.

• When the source is CD, you can also use CD Direct

Recording (see page 18) and Auto Edit Recording (see
page 19).

• When the source is deck A, you can also use the

dubbing method. (See “Dubbing Tapes” on page 18.)

* See “To record an AM station — Beat Cut” on page 18.

6

Start recording.
On the unit:
Press REC START/STOP.
On the remote control:
Press and hold REC START/STOP
for more than 1 second.

The REC (recording) indicator lights up on the
display and recording starts.

To stop during recording, press REC START/STOP again
or 

7

.

To remove the cassette, press EJECT 

0

 for deck B.

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse Mode
indicator lights up as —

• When using the Reverse Mode for recording, start

recording in the forward (

3

) direction first.

Otherwise, recording will stop when recording is done only
on one side (reverse) of the tape.

To cancel Reverse Mode, press the button again so that the
Reverse Mode indicator lights up as —

IMPORTANT:

• It should be noted that it may be unlawful to re-record

pre-recorded tapes, records, or discs without the
consent of the owner of copyright in the sound or video
recording, broadcast or cable programme and in any
literary, dramatic, musical, or artistic embodied
therein.

• The recording level is automatically set correctly, so it is

not affected by the VOLUME control (and the
SUBWOOFER VOLUME control for MX-J700; ACTIVE
BASS EX. LEVEL control for MX-J500). Thus, during
recording you can adjust the sound you are actually
listening to without affecting the recording level.

• While recording, you can hear sound modes through the

speakers or headphones. However, the sound is recorded
without these effects (see page 10).

• If recordings you have made have excessive noise or static,

the unit may be too close to a TV. Increase the distance
between the TV and the unit.

• You can use type I and II tapes for recording.

To protect your recording

Cassettes have two small tabs on
the back to protect unexpected
erasure or re-recording.
To protect your recording,
remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
When using type II tape, be careful not to cover the holes
used to detect the tape type.

To keep the best recording and playback sound quality

If the heads, capstans, and pinch rollers of the cassette decks
become dirty, the following will occur:
• Impaired sound quality
• Discontinuous sound
• Fading
• Incomplete erasure
• Difficulty in recording

To clean the heads, capstans, and pinch rollers
Use a cotton swab moistened with alcohol.

To demagnetize the heads
Turn off the unit, and use a head demagnetizer (available at
electronics and record shops).

Heads

Capstans

Pinch rollers

EN17-24.MX-J500/700[J]/f

99.12.19, 1:54 PM

17

www.DataSheet4U.com

www.DataSheet4U.com

Summary of Contents for MX-J700



























































































Reviews: