4
Connections
Connecting the Antennas
NOTES:
• Make sure the FM antenna does not touch any other terminals, connecting cords or the AC power
cord. Also, keep the antenna away from metallic parts of the unit, connecting cords, and the AC
power cord. This could cause poor reception.
• Keep the AM loop antenna cable wrapped around the AM loop antenna frame, otherwise the
effectiveness and sensitivity of the AM loop antenna may be reduced.
Do not connect the AC power cord until all other connections have been made.
For better FM reception
Disconnect the supplied FM antenna,
and connect to an outdoor FM antenna
using a 75
Ω
wire with coaxial type
connector.
Left side
AM loop antenna (supplied):
Turn it until the best reception is obtained.
FM antenna (supplied):
Extend it so that you can obtain
the best reception.
To connect the AM loop antenna
Outdoor FM antenna (not supplied)
FM 75
Ω
COAXIAL terminal
(on the rear panel)
EN_NX-PN7[C].BOOK Page 4 Sunday, April 27, 2008 1:54 PM