Included AM loop antenna
0
Place the AM loop antenna as near as possible to the window to obtain the best reception.
.
3.35A
18V
Follow the same steps to insert the other wire
Insert the
wire core
Press hard
・
Inserting the antenna wire
Adjust the connected AM loop
antenna to the left or right to
position it in the direction with
the best reception.
Fit the tab into the groove
until it clicks into place
Foldable part at the far end
Tab
Groove
・
Assembling the antenna
Release
①
②
③
④
CAUTION
0
Use the AM loop antenna with the antenna wire wound around the frame. Removing the wire from the
frame deteriorates the sensitivity of the antenna.
0
Make sure that the antenna conductor is not in contact with other terminals or cables. Position the
antenna away from other cables. Reception may be interfered if they are placed too close to the antenna.
12
Downloaded from www.vandenborre.be