1-16 (No.YA098)
3.1 DISASSEMBLY PROCEDURE [42V MODEL]
CAUTION:
•
When exchanging parts etc. with the front side (PDP side)
facing down, please place a protection sheet below before
starting, so as to prevent scratches on the front side.
3.1.1 REMOVING THE REAR COVER (Fig.1)
(1) Remove the power cord.
(2) Remove the 2 screws [A] and the 6 screws [B].
(3) Remove the TABLE TOP STAND. [PD-42B50BJ]
(4) Remove the 2 screws [C]. [PD-42B50BU]
(5) Remove the 15 screws [D], the 4 screws [E], the 8 screws
[F] and remove the REAR COVER.
SECTION 3
DISASSEMBLY
3.1.2 REMOVING THE TERMINAL COVER AND CENTER COVER
(Fig.1)
•
Remove the REAR COVER.
(1) Remove the 7 screws [G], and remove the CHASSIS
SHIELD COVER.
(2) Remove the 7 screws [H], the 6 screws [I] and the 1 screw
[J], and remove the TERMINAL COVER.
(3) Remove the 6 screws [K], and remove the CENTER
COVER.
A
D
G
H
TERMINAL
COVER
C
E
E
K
H
I
J
B
(x11)
D
(x4)
(x2)
(x6)
(x2)
(x2)
F
(x8)
(x6)
(x7)
(x6)
(x6)
TABLE TOP STAND
[PD-42B50BJ]
CHASSIS SHIELD
COVER
CENTER
COVER
Fig. 1
[PD-42B50BU]
REAR
COVER