21
Recording from the radio or an external source connected
to the AUX IN terminals
Operate in the order shown
1
Load a cassette with side A facing out.
(Wind past the tape leader before starting recording.)
÷
Make sure the tape direction is set to
3
(forward direction).
2
Select the source to be recorded.
TUNER: Press the TUNER BAND/FM MODE button.
Tune to the required station.
AUX:
Press the AUX button.
3
Select the desired reverse mode.
4
Press the ONE TOUCH REC button.
÷
The recording starts from the beginning of side A.
BEAT CUT button
When recording an AM broadcast, beats may be produced which are not
heard when listening to the broadcast. In such case, set this button after
setting the deck to the record mode so that the beats are eliminated.
Normally set this button to "CUT-1".
Erasing
A recorded tape can be erased by recording new material over the
previous material.
To erase a tape without making a new recording.....
1. Press the TAPE
23
button to set to the TAPE mode.
2. Insert the cassette to be erased facing out.
3. Press the ONE TOUCH REC button.
It should be noted that it may be unlawful to re-record pre-recorded
tapes, records, or discs without the consent of the owner of copyright
in the sound or video recording, broadcast or cable program and in
any literary, dramatic, musical, or artistic work embodied therein.
BEAT CUT
PRESET
TUNING
2
4
1
SLEEP
PROGRAM
RANDOM
REPEAT
AUTO
PRESET
DISPLAY
REVERSE MODE
MULTI CONTROL
REW
FF
TAPE
TUNER
BAND
FM MODE
C D
DOWN
UP
SET
AUX
VOLUME
AHB PRO
SOUND
ACS
3
OPEN
BEAT CUT
AUX
PRESET
TUNING
ONE TOUCH
REC
VOLUME
C D
TAPE TUNER
MULTI CONTROL
REW
ACS
STOP
FF
BAND
STANDBY
ON/STANDBY
AHB PRO
AHB PRO
SPEAKER
ILLUMINATION
/ACS
SOUND
