8
English
Turning the Power On and Off (Standby)
On the front panel:
To turn on the power, press POWER.
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
To turn off the power (into standby mode),
press POWER again.
The STANDBY lamp lights up. A small amount
of power is consumed in standby mode.
To turn the power off completely, unplug the AC
power cord.
From the remote control:
To turn on the power, press AUDIO POWER.
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
To turn off the power (into standby mode),
press AUDIO POWER again.
The STANDBY lamp lights up.
Selecting the Source to Play
Press one of the source selecting buttons.
On the front panel:
From the remote control:
Basic Operations
The following operations are commonly used when you play any sound source.
DVD MULTI
CD
DVD
PHONO
VCR
TAPE/MD
SOURCE NAME
FM
AM
Selected source name appears
Current volume level
is shown here
Current source
name appears
TAPE/MD
FM/AM
VCR
DVD
DVD MULTI
PHONO
CD
VOLUME
AUDIO
MUTE TUNED
SLEEP 3D-PHONIC
AUTO STEREO PRO LOGIC
HALL
DAP
L
VOLUME
R
CH-
MHz
kHz
On the front panel:
DVD MULTI
Select the DVD player for viewing the digital video
disc using the analog discrete output mode (5.1CH
reproduction) on the DVD player.
To enjoy the DVD MULTI playback, see page 20.
DVD
Select the DVD player for viewing the stereo digital
video disc.
VCR
Select the video component connected to the VCR
jacks.
FM
Select an FM broadcast.
AM
Select an AM broadcast.
TAPE/MD
Select the cassette deck (or the MD recorder).
PHONO
Select the turntable.
CD
Select the CD player.
From the remote control:
FM/AM
Select an FM/AM broadcast.
Each time you press the button, the band changes
alternately.
• Other buttons function in the same way as the buttons on the front
panel.
Note:
When connecting an MD recorder (to the TAPE/MD jacks), change
the source name that appears on the display. See page 11 for details.
Selecting different sources for picture and sound
You can watch picture from a video component while listening to
sound from another component.
Press one of the audio source selecting buttons (CD, TAPE/MD,
PHONO, FM, AM), while viewing the pictrue from a video
component such as the VCR or DVD player, etc.
Note:
Once you have selected a video source, pictures of the selected
source are sent to the TV until you select another video source.
STANDBY
POWER
STANDBY
POWER
*
*
*
*
Note:
When you press one of the source
selecting buttons, marked above
with an asterisk (*), on the remote
control, the receiver automatically
turns on.
EN08-20.RX-5000V[C]/F
00.2.3, 8:26 PM
8
