RX-5030VBK
(No.22025)1-5
2.3 Removing the rear panel
(See Fig.4)
• Prior to performing the following procedure, remove the top
cover.
(1) From the back side of the main body, remove the strain re-
lief from the rear panel in the direction of the arrow.
(2) Remove the eighteen screws
E
and four screws
F
attach-
ing the rear panel.
Fig.4
2.4 Removing the DSP board, audio input board, DVD board and video board
(See Fig.5)
• Prior to performing the following procedure, remove the top
cover and rear panel.
(1) From the top side of the main body, disconnect the DSP
board from the connector CN481 on the audio board.
(2) Disconnect the audio input board from the connector
CN421 on the audio board.
(3) Disconnect the DVD board from the connector CN431 on
the audio board.
(4) Disconnect the video board from the connector CN441 on
the audio board.
Fig.5
E
E
F
E
F
F
F
Strain relief
Rear panel
CN481
Audio board
DVD board
Video board
CN421
Audio input board
DSP board
CN431
CN441
