38
English
Specifications
Amplifier
Output Power
At Stereo operation
Front channels:
100 W*
1
per channel, min. RMS, driven into
8
Ω
, at 1 kHz with no more than 0.8% total
harmonic distortion (IEC268-3/DIN).
At Surround operation
Front channels:
100 W per channel, min. RMS, driven into
8
Ω
, at 1 kHz with no more than 0.8% total
harmonic distortion.
Center channel:
100 W, min. RMS, driven into 8
Ω
, at 1 kHz
with no more than 0.8% total harmonic
distortion.
Surround channels: 100 W per channel, min. RMS, driven into
8
Ω
, at 1 kHz with no more than 0.8% total
harmonic distortion.
(*
1
Measured on AC 110 V, 127 V, 220 V, and 240 V)
Audio
Audio Input Sensitivity/Impedance (1 kHz)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
220 mV/47 k
Ω
Audio Input (DIGITAL IN)*
2
Coaxial
DIGITAL 1 (DVD):
0.5 V(p-p)/75
Ω
Optical
RX-6042S
DIGITAL 2 (CD), DIGITAL 3 (TV):
–21 dBm to –15 dBm (660 nm ±30 nm)
RX-5042S
DIGITAL 2 (CD):
–21 dBm to –15 dBm (660 nm ±30 nm)
*
2
Corresponding to Linear PCM, Dolby Digital, and DTS
Digital Surround (with sampling frequency—32 kHz,
44.1 kHz, 48 kHz)
Recording Output Level
TAPE/CDR, VCR:
220 mV
Signal-to-Noise Ratio (’66 IHF/DIN)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
87 dB/62 dB
Frequency Response (8
Ω
)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
20 Hz to 50 kHz (+1 dB, –3 dB)
Bass Boost—Only for RX-6042S:
+3 dB ±1 dB at 100 Hz
Equalization (5 bands)
63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz:
±8 dB (in 2 dB steps)
Main differences between the models
Models
Output/Input terminals
Sources
Functions
COMPONENT
S-VIDEO
Analog discrete
DVD MULTI
Bass Boost
Center Tone
AV Compulink
(IN/OUT)
(IN/OUT)
(DVD MULTI)
RX-6042S
‡
‡
‡
‡
‡
‡
AV COMPULINK-III
RX-5042S
×
×
×
×
×
×
AV COMPULINK
• The remote control supplied with RX-6042S can operate other manufacture’s video equipment, but the one with RX-5042S cannot.
‡
: Equipped
×
: Not equipped
Designs and specifications are subject to change without notice.
Video
Video Input Sensitivity/Impedance
Composite video
DVD, VCR:
1 V(p-p)/75
Ω
S-video—Only for RX-6042S
DVD, VCR
(Y: luminance):
1 V(p-p)/75
Ω
(C: chrominance, burst):
0.286 V(p-p)/75
Ω
Component—Only for RX-6042S
DVD, VCR
(Y: luminance):
1 V(p-p)/75
Ω
(P
B
, P
R
):
0.7 V(p-p)/75
Ω
Video Output Level
Composite video
VCR, MONITOR OUT:
1 V(p-p)/75
Ω
S-video—Only for RX-6042S
VCR, MONITOR OUT
(Y: luminance):
1 V(p-p)/75
Ω
(C: chrominance, burst):
0.286 V(p-p)/75
Ω
Component—Only for RX-6042S
MONITOR OUT
(Y: luminance):
1 V(p-p)/75
Ω
(P
B
, P
R
):
0.7 V(p-p)/75
Ω
Synchronization:
Negative
Signal-to-Noise Ratio:
45 dB
FM tuner (IHF)
Tuning Range:
87.50 MHz to 108.00 MHz
Usable Sensitivity
Monaural:
12.8 dBf (1.2 µV/75
Ω
)
50 dB Quieting Sensitivity
Monaural:
16.0 dBf (1.7 µV/75
Ω
)
Stereo:
37.5 dBf (20.5 µV/75
Ω
)
Stereo Separation at OUT (REC):
35 dB at 1 kHz
AM tuner
Tuning Range:
531 kHz to 1 602 kHz (at 9 kHz intervals)
530 kHz to 1 600 kHz (at 10 kHz intervals)
General
Power Requirements:
AC 110 V/127 V/220 V/230 V – 240 V
,
adjustable with the voltage selector,
50 Hz/60 Hz
Power Consumption
For RX-6042S:
200 W (at operation)
2 W (in standby mode)
For RX-5042S:
210 W (at operation)
4.5 W (in standby mode)
Dimensions (W x H x D)
For RX-6042S:
435 mm x 146.5 mm x 409.5 mm
For RX-5042S:
435 mm x 146.5 mm x 369.5 mm
Mass
For RX-6042S:
9.8 kg
For RX-5042S:
8.0 kg
31-38_5042&6042[US]f.p65
04.2.4, 5:45 PM
38
