JVC RX-6020VBK Instructions Manual Download

Page: 56 / 72

Creating Realistic Sound Fields

■

DAP (Digital Acoustic Processor) modes

DAP modes have been designed to create important acoustic
surround elements.

The sound heard in a live club, dance club, hall or pavilion consists
of direct sound and indirect sound—early reflections and reflections
from behind. Direct sounds reach the listener directly without any
reflection. On the other hand, indirect sounds are delayed by the
distances of the ceiling and walls (see the diagram below).
These indirect sounds are important elements of the acoustic
surround effects. The DAP mode can reproduce a realistic sound
field by adding these indirect sounds.

DAP modes can be used when the front and rear speakers are
connected to this receiver (without respect to the center speaker
connection: no sound comes out of the center speaker even if it is
connected).

The following DAP modes are provided with this receiver:

LIVE CLUB

: Gives the feeling of a live music club with a low

ceiling.

DANCE CLUB

: Gives a throbbing bass beat.

HALL

: Gives clear vocal and the feeling of a concert

hall.

PAVILION

: Gives the spacious feeling of a pavilion with a

high ceiling.

These DAP modes can be used to add the acoustic surround effects
while reproducing 2 channel stereo software—either analog or
digital except Dolby Digital and DTS Digital Surround—and can
give you a real “being there” feeling.
• When one of the DAP modes is selected, the DSP indicator lights

up on the display.

Available Surround modes for each input signal

䡬

: Possible /

⳯

: Impossible

Mode SURROUND

DOLBY

DTS

LIVE

DANCE

HALL

PAVILION

ALL CH

Signals

OFF (stereo)

DIGITAL

SURROUND

MOVIE

MUSIC

CLUB

STEREO

Dolby Digital

䡬

⳯

(Multichannel)

Dolby Digital

䡬

⳯

䡬

⳯

(2 channel)

DTS Digital
Surround

䡬

⳯

䡬

⳯

(Multichannel)

DTS Digital
Surround

䡬

⳯

䡬

⳯

(2 channel)

Linear PCM

䡬

⳯

䡬

Analog

䡬

⳯

䡬

■

All Channel Stereo

This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers.

All Channel Stereo can be used when the front and rear
speakers are connected to this receiver without respect to the
center speaker connection.

If the center speaker is connected and activated, the same phase of
the front left and right signals are output through the center speaker.

All Channel Stereo can be used while reproducing 2 channel stereo
software, either analog or digital except Dolby Digital and DTS
Digital Surround.
• When All Channel Stereo is selected, the DSP indicator lights up

on the display.

DVD MULTI Playback Mode

This receiver provides the DVD MULTI Playback Mode for
reproducing the analog discrete 5.1 channel output mode of the
DVD player or other equipment.
You can adjust speaker output levels while playing back a video
software such as a DVD using the analog discrete 5.1 channel
output mode.
• For connecting analog discrete output jacks, see page 7.
• For details on the DVD MULTI Playback Mode, see page 24.

Note:

When you select “DVD MULTI” as the source to play, Surround mode
is canceled, and the SURROUND ON/OFF and SURROUND MODE
buttons do not work.

All Channel Stereo reproduction

Sound reproduced from All Channel Stereo

Creating sound field

Early reflections

Reflections from behind

Direct sounds

EN18-23.RX-6020V[J]_f

01.12.7, 11:34 AM