32
English
Manufacturer
Codes
Manufacturer
Codes
Emerson
11
Philips
09
Fisher
29
RCA
05, 06
Funai
10, 14, 15, 16
Samsung
24
GoldStar
12
Sanyo
21, 22, 23
Hitachi
04
Sharp
27, 28
JVC
01, 02, 03
Shinton
30
Mitsubishi
13
Sony
18, 19, 20
To change the transmittable signals for
operating another manufacturer’s VCR
1. Press and hold VCR POWER.
2. Press VCR.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
Examples: For a PANASONIC product, press 0, then 7.
For a MITSUBISHI product, press 1, then 3.
4. Release VCR POWER.
Following button can be used for operating the VCR:
VCR POWER:
Turns on and off the VCR.
After pressing VCR, you can perform the
following operations on the VCR:
VCR CH +/–:
Changes the TV channels on the VCR.
3
:
Starts playback.
1
:
Rewinds a video tape.
¡
:
Fast winds a video tape.
7
:
Stops operation.
8
:
Pauses. To resume playing, press
3
.
REC PAUSE
:
Pauses recording temporarily.
Note:
Refer to the manual supplied with your VCR.
5. Try to operate your VCR by pressing VCR
POWER.
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of VCR,
try each one until the correct one is entered.
To change the transmittable signals for
operating a CATV converter or satellite tuner
1. Press and hold CATV/SAT POWER.
2. Press CATV CONTROL.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
Examples: For a JVC product, press 1, then 4.
For a SONY product, press 2, then 0.
4. Release CATV/SAT POWER.
Following button can be used for operating the CATV converter
or the satellite tuner:
CATV/SAT POWER:
Turns on and off the CATV converter
or satellite tuner.
After pressing CATV CONTROL, you can perform the
following operations on the equipment:
CATV CH +/–:
Changes the channels.
1 – 9, 0, 100+ (+10):
Selects the channel.
100+ (+10) button will function as the
ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
RETURN:
Alternates between previously selected
channel and the current channel.
Note:
Refer to the manual supplied with your CATV converter or satellite
tuner.
5. Try to operate your CATV converter or satellite
tuner by pressing CATV/SAT POWER.
When your CATV converter or satellite tuner turns on or off,
you have entered the correct code.
If there are more than one code listed for your brand of
CATV converter or satellite tuner, try each one until the
correct one is entered.
Manufacturer
Codes
Manufacturer
Codes
Hamlin
15, 16, 17, 18 RCA
19
Jerrold
01, 02, 03, 04, Scientific Atranta 09, 10
05, 06, 07, 08 Sony
20
Pioneer
13, 14
Zenith
11, 12
Manufacturers’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
NEC
25
Toshiba
26
Panasonic
07, 17
Zenith
08
Manufacturers’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
EN27_35.RX-6100V[C]
00.2.3, 6:38 PM
32
